Dissertation > Excellent graduate degree dissertation topics show
Application of Doped Poly(3, 4-ethylenedioxythiophene) in Organic Light-emitting Devices
Author: BiaoHuiChuan
Tutor: LiangChunJun
School: Beijing Jiaotong University
Course: Materials Physics and Chemistry
Keywords: PEDOT:PSS polymer light-emitting diodes polymer light-emitting electrochemical cells MEH - PPV PEO
CLC: O482.31
Type: Master's thesis
Year: 2010
Downloads: 147
Quote: 0
Read: Download Dissertation
Abstract
|
ABSTRACT:Poly (3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is one of the most important conducting polymer. The solution of PEDOT doped by PSS has notable properties in electrical conductivity and optics, which is always used to make as the electrode of the devices. It can realize the light of the devices through from the both side. This paper mainly studies the application of the conductive polymer PEDOT:PSS in optical-electrical device. Including:1:First of all, we studied the conductivity of PEDOT:PSS, which can be highly improved by doping organic alcohols. In the experiment we find that the conductivity of the film made by PEDOT:PSS solution which is doped by DMSO is the highest. The conductivity of film is improved from 0.33s/cm to 60.6s/cm. Finally we chose the dimethyl sulfoxide (DMSO) for the electrode of the devices.2:Organic light-emitting diode are fabricated by using PEDOT:PSS film as anode and ITO as the cathode. The structure of the device is D-PEDOT/TiO2/MEH-PPV/ITO. We use MEH-PPV as light emitting layer and fabricate the organic light-emitting diodes with the Al electrode. Compared with the devices of Al electrode, the luminance of the devices with PEDOT electrode is 30cd/m2 and the efficiency is 0.015cd/A. The luminance of the devices with Al electrode is 220cd/m2 and the efficiency is 0.021cd/A. We can find that the property of the devices with PEDOT electrode is too worse than the devices with Al electrode. We analysis the probable reason of the difference. One is the conductivity of the D-PEDOT is worse than that of ITO. The other is that the work function of ITO is too high to inject electron from the cathode. So we fabricate the LEC of which the work function is not important.3:We fabricate organic light emitting electrochemical cell (LEC) using the PEDOT:PSS electrode. Because of the difference of OLEC and OLED in light emitting mechanism, the work function of the electrode is not very important to devices. We fabricate the LEC devices with the structure of ITO/MEHPPV+PEO+LiCF3SO3/TiO2/D-PEDOT. The luminance is 450cd/m2,and the efficiency is 0.43cd/A.Compared with the OLED devices of same structure,the property of the devices apparently improved.
|
Related Dissertations
- Synthesis of Novel Stabilizers and Their Application in Miniemulsion,TQ316.334
- Synthesis, Self-assembly, and Hydrogelation of Dendronlike Poly (ε-L-lysine)-b-PEO Copolymers,O631.3
- Investigation of the Needleless Electrospinning Processes,TQ340.6
- Properties of Solid Polymer Electrolytes Composite Modified by Sca/Inorganic Particles,O631.3
- The Design and Implementation of the Intercommunication of Distribution Management System and Post Electronic Office System in China Post,TP399-C2
- The Study of Preparation POM and PE-b-PEO/Carbon Nanotubes Via a SC CO2-assisted Process,TB383.1
- Synthesis and Characterization of Amphiphilic Graft Copolymer PEO-g-PCL and PEO-g-(PCL-b-PtBA)2,O631.3
- The Preparation and Structure of PEDOT: PSS Based Organic Spintronic Materials and Devices,TN04
- Energy Relaxation on the Excited Ststes in MEH-PPV Investigated with Femtosecond Transient Grating,O561.3
- Studies on Gel Retention Mechanism of Nonionic Retention and Drainage System,TS714
- Structure and Morphology of the LB Films of Homo-PS and PS/PS-b-PEO Blends,O631.3
- Investigation of the Sputtering Needleless Electrospinning Processes,TQ340.6
- Preparation and Study on Micelles of EO-PO-EO Triblock Copolymers,O631.3
- Study on Electrochemical Properties of a Novel PEI-PEO-Based Composite Solid Polymer Electrolyte,TM912
- Study on CdSe Quantum Dot/meh-ppv Conjugated Polymer Blend Solar Cells,TM914.4
- Effect of Submicron Scale LiNi0.8Co0.2O2 on the Physical and Chemical Properties of the (PEO)8 LiClO4 Polymer Electrolyte,TB383.2
- The Synthesis of Two-arm PEO with a Functional End Group and Its Derivatives,O631.3
- Effect of Dielectric Barrier Layer on Ceramic Coating Formation Process of Magnesium Alloy with Plasma Electrolytic Oxidation,TG174.451
- Preparation & Modification of Ordered Mesoporous Materials and Its Adsorption Behavior of Cr(Ⅵ)、cu(Ⅱ),TB383.4
- Electrode modification of polymer solar cell performance and stability of,TM914.4
- Research on the Novel Donor Materials & Properties of Organic Bulk Heterojunction Solar Cell,TM914.4
CLC: > Mathematical sciences and chemical > Physics > Solid State Physics > Solid nature of the > Optical Properties > Luminescence
© 2012 www.DissertationTopic.Net Mobile
|