Dissertation > Excellent graduate degree dissertation topics show
Aerodynamic Noise Prediction of Horizontal Axis Wind Turbine
Author: LiYingLong
Tutor: OuYangHua
School: Shanghai Jiaotong University
Course: Aerospace Propulsion Theory and Engineering
Keywords: HAWT aerodynamic noise BEM theory stall delay model
CLC: TK83
Type: Master's thesis
Year: 2010
Downloads: 174
Quote: 0
Read: Download Dissertation
Abstract
|
The development of wind energy in the world is flourishing because it is a kind of absolutely clean and renewable energy. But with the fast increase of wind energy development, it also gives rise to the problems concerning public acceptance of wind energy. The noise is the main drawback. The noise from wind turbines may annoy people who live around. This problem becomes especially serious due to the fact that wind turbines are densely covered in many areas. Therefore it’s necessary to estimate the noise level in the field where the wind turbines are installed.Generally, the noise from wind turbine is composed with mechanical noise and aerodynamic noise. The mechanical noise is caused by the different operating machine elements which can be reduced efficiently by many engineering methods. However, the way to reduce aerodynamic noise from wind turbines is a bit complex which should be studied more. Through the years, several models have been proposed to explain and predict wind turbine noise.Some of the models make use of complex CFD solvers that have not yet matured to be applied in practice. As a compromise between computing speed and accuracy, the most commonly used models are based on semi-empirical relations.Main contents of this thesis are described as the following:1. Employ the experimental results on airfoil self-noise by Brooks, Pope and Marcolini, together with the turbulence inflow model proposed by Lowson. The model was tested successfully against the measurement result.2. Analyze the effect of turbulence intensity and pitch angle on sound pressure level of wind turbine aerodynamic noise and present effective methods of predicting and reducing wind turbine aerodynamic noise.3. Du-Selig stall delay model is used to improve the performance prediction accuracy. But the calculation results have shown the stall delay model have little effect on the prediction accuracy.
|
Related Dissertations
- Design and Optimation for Cross Flow Fan in Air-conditioning,TH43
- Numerical Simulation and Experiment Study of the Noise Radiated by Two Circular Cylinders in Tandem Arrangements,TB53
- Aerodynamic Performance Prediction of the HAWT,TM315
- Coupling Bionic Research on the Aerodynamic Noise Controlling of Aerodynamic Turbine,TB535
- Numerical Analysis and Experimental Research on the Aeroacoustics of Cross-flow Fans,TB53
- High flow fine numerical simulation, experimental research and its application in pneumatic optical applications,V211.4
- Emulational Study on the Cooling Fan of the Heavy Commercial Vehicle with High Mass Flow Rate and Low Aerodynamic Noise,U464.138.4
- Dynamic Analysis on the Rotor of the Horizontal Axis Wind Turbine,TK83
- Helicopter rotor aerodynamic noise prediction method,V211.41
- Study on Aerodynamic Noise of Road Vehicle with High Speed,U467.493
- Study on Aerodynamic Performance and Aero-acoustic Performance of Engine Cooling Fan,U464
- Analysis of Multi-blade Centrifugal Fan on CFD and Noise Prediction,TH432
- Numerical Research on Rotor-stator Interaction and Aerodynamic Noise of Circumferential Skew Rotor Blades,V231.3
- Solar cooling with a small jet noise research and countermeasure,TB65
- The Theoretical Research and Numerical Simulation of Aerodynamic Noise for High-Speed Train,U270.16
- The Research of Vibration Characteristics of Main Ventilator Used by the Coal Mine,TD441
- Roots blower performance optimization and numerical study of flow field,TH444
- Research on Automobile Exterior Aerodynamic Noise,U461.1
- Research of Theory and Application for Sound Radiation with Gas-Structure Coupling,TB53
- Research on Calculating Method of Interior Aerodynamic Noise for High-speed Automobile,TB532
CLC: > Industrial Technology > Energy and Power Engineering > Wind energy, wind machine > Wind machinery and equipment
© 2012 www.DissertationTopic.Net Mobile
|