Effect of Nd and Reciprocating Extrusion on Microstructure and High Temperature Creep Resistance of Al₂O_3f/AZ91D Composite

Abstract

Related Dissertations

1. The melt extrusion RP precision analysis and processing,TG376
2. ECAP contact wire with Cu-Cr-Zr alloys,TG376
3. Large-diameter thin-walled tube thinning spin forming process research and wall thickness error prediction,TG376
4. Research on Ball-Spinning Forming for Large Size and Thin-Walled Tube,TG376
5. Numerical Simulation and Forming Process Optimization on Unsteady Bending of Large-diameter Equal Wall-Thickness Elbow,TG376.9
6. Analysis and Research on the Spin Forming Process of Tubeless Steel Wheel,TG376
7. Numerical Simulation and Process Research for Titanium Alloy Tubes,TG376
8. Research on Technology and Equipment of the Cold Extrusion for Spline,TG376
9. Research on Ball-Spinning Forming Craft of Thin-Walled Tube,TG376
10. Hypereutectic high chromium cast iron pieces of quality and its impact extrusion abrasive wear performance analysis,TG376
11. Large plastic deformation of composite extrusion finite element simulation study,TG376
12. The Numerical Simulation Research on Tube Extrusion Forming Technology of Glass/Aluminium Metal Matrix Composites,TG376
13. The Research on Surface-strengthening Technology Via Warm Surface-rolling,TG376
14. Numerical Simulation of Equal Channel Angular Extrution of Fine-Grained GCr15 Alloy Material and Tribological Properties Research,TG376.1
15. Deformation Rule Research on Inner Ring of Cylindrical Roller Bearing in Cold Ring Rolling Process,TG376
16. Forming and Properties of SiCp/AZ91 Magnesium Matrix Composite Tubes,TG376.2
17. Study on Temperature Distribution Mechanism and Structural Optimization in Micro-scale Warm Extrusion,TG376
18. Continuous extrusion of copper -clad steel wire engineered experimental study of the key issues,TG376
19. Investigation into the System and Numerical Simulation of Warm Micro-Extrusion,TG376
20. Simulation and Experimental Research on Vertical Extrusion Process for P91 Thick Wall Steel Tube,TG376
21. Research on Hot Extrusion Techniques and Equipment for Axle-Shaft Sleeve of Engineering Machinery,TG376