Dissertation > Excellent graduate degree dissertation topics show
Research of Digital Ultrasonic Inspection System Based on FPGA and DSP
Author: ZhengChao
Tutor: WangXueMei
School: Southwest Jiaotong University
Course: Measuring Technology and Instruments
Keywords: Vehicle parts detection Digital ultrasonic detection system FPGA DSP USB
CLC: TP274.53
Type: Master's thesis
Year: 2010
Downloads: 280
Quote: 3
Read: Download Dissertation
Abstract
|
With the implementation of the strategy of China's high-speed railway overloaded rail transport steady improvement in the speed and capacity of railway rolling stock in the new shoulder the historical responsibility and mission while also facing more serious traffic safety test. The stability of the the locomotive vehicle parts performance is an important guarantee of the safe operation of trains, varying degrees of damage in the case of long-term operation, these parts can easily transport pose a threat to railway safety, serious and even caused a major traffic accident. Therefore, the use of advanced detection technology and equipment of rolling stock in service parts the timely overhaul, to ensure traffic safety and accelerate the implementation of the Railway Development Strategy has important practical significance. The thesis focuses on the problems and shortcomings of the simulation of the field of ultrasonic testing of railway vehicle detection system, proposed a set of FPGA and DSP as the core digital ultrasonic testing system solutions, to achieve a high-frequency, low-amplitude ultrasound analog signal acquisition , processing, storage and transmission. The paper completed the hardware circuit design of the detection system. Systems use high-speed broadband amplifier AD8099 and AD603 ultrasonic echo signal conditioning, and the signal after the sampling frequency of 40MHz 8-bit high-speed analog-to-digital converter TLC5540 on conditioning sample quantization; system to of FPGA devices EP1C3T144C8 and DSP devices TMS320F2812 In addition, the system uses the USB controller CY7C68013 as an interface to communicate with the host computer to complete acquisition of data transmission control module core, to solve the problem of the ultrasonic echo high-speed data stream processing; The papers in FPGA development software Quartus Ⅱ system logic control functions and data cache module design and simulation, and verify the effectiveness of software design; system acquisition and control software development using C language DSP integrated development environment CCS work; addition, Keil environment to write and debug of USB firmware. Papers on the basis of complete system hardware and software design, the vehicle laboratory digital ultrasonic testing system designed functional testing. The test results proved that the detection system is able to meet the requirements of of ultrasonic testing required for high-speed data acquisition, processing and transmission of the extent of the ultrasonic testing system automation and intelligent, highly theoretical significance for the improvement and development of ultrasonic testing and practical significance.
|
Related Dissertations
- Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
- Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
- Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
- Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
- Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
- Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
- Development of LXI Arbitrary Waveform Generator,TM935
- Research on Synchronous Motor Excitation Control System,TM341
- Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
- Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
- The AES Algorithm and Its Implementation in DSP,TN918.1
- The Design of a DSP-Based Robot Speech Command Recgnition System,TN912.34
- Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
- Research on Signal Receiving System of Phase Laser Range Finder,TN249
- Study on Implementation Technology of Channel Estimation in OFDM System Based on DSP,TN919.3
- Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
- Voice Signal De-noise Base on Wavelet and Arithmetic Implement with DSP,TN912.3
- Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
- Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
- Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
- Research on Image Compression and Implementation Using TMS320C6713 Based on SPIHT Algorithm,TP391.41
CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Automatic detection system using a variety of new technologies > Ultrasonic testing equipment
© 2012 www.DissertationTopic.Net Mobile
|