Dissertation > Excellent graduate degree dissertation topics show

The Research Application of 4H-SiC SBD in the Power Factor Correction Circuit

Author: ZuoXue
Tutor: ZhangYuMing
School: Xi'an University of Electronic Science and Technology
Course: Microelectronics and Solid State Electronics
Keywords: SiC SBD switching lose APFC Pspice
CLC: TN311.7
Type: Master's thesis
Year: 2010
Downloads: 92
Quote: 0
Read: Download Dissertation

Abstract


Wide bandgap semiconductor material SiC, following Si and GaAs, is a new generation semiconductor material and it has excellent properties such as wide bandgap, high breakdown field, high thermal conductivity and good reverse recovery character. SiC Schottky diode can reduce the switching loss and help the implement of high switching frequency in high power CCM APFC.In this thesis, the characters of SiC SBD, the definition and the calculation of power factor and the switching loss of components in Boost APFC are analyzed in detail, and the topologies and the control methods of all kinds of PFC, the package and the operational principle of control chip UC3854 is also introduced. By simulation, compared with positive PFC, the property of the active PFC circuit is improved, in which the THD reduces from 25.2% to 9.3%, the PF value increases from 0.9697 to 0.9957, and the output voltage fluctuation is reduced. This thesis mainly focuses on the design of a APFC circuit with output power of 250W using UC3854, in which Cree’s SiC SBD CSD10060 is used instead of Si FRED in the market. With Pspice simulation, the THD reduces from 9.3% to 4.8%, the PF value increases from 0.9957 to 0.9988, the power loses of the diode is reduced about 1~2W and the switching losses is reduced about 8W due to the good inverse recovery characteristic of SiC SBD. Finally the output is increased about 10W, so the power density is enhanced.

Related Dissertations

  1. The Research of a Novel High Efficiency PFC Circuit Based on One Cycle Control,TM46
  2. Research of A Practical Nanosecond High-voltage Pulse Power Source,TM46
  3. Research on APFC-based Single phase High frequency PWM Rectifiers,TM46
  4. Research on Planar Passive Integration for EMI Filter of Switching Mode Power Supplies,TN713
  5. Research and Design of the HF Wireless Transceiver,TN859
  6. Research on the Process of SiC SBD and Utilize Silvaco to Simulate Its Characteristic,TN304.24
  7. Research on Electromagnetic Compatibility of Switching Power Supply,TN03
  8. Improved Design and Simulation for 4-TFT OLED Pixel Circuit,TN873
  9. Study on a Modeling Method for the Thermopile Infrared Sensor Based on Neural Network,TP212.1
  10. Cuts the Wave Control Circuit Based on the MPPT,TM615
  11. The Design and Simulation of Mixed Analog-Digital Filters,TN713
  12. Research on Middle Frequency Inverter Resistance Spot Welding Power Design,TG434.1
  13. Pulse wave sensor transmitter power and Experimental Research,TN86
  14. The Analysis of Thermoelectronic Characteristic of SWH65-28D15 HIC,TN86
  15. Simulation Study of IGBT Model,TN386
  16. The Study and Design of 35W Metal Halide Lamp Digital Electronic Ballast,TM923.61
  17. Optical Coherence Tomography Signal Detection and Processing Circuit Design and Fabrication,TP274.5
  18. Design of Magnetic Switch Pulse Compressor System and Simulation Experiment Study,TN78
  19. Induction lamp electronic ballast,TM923.61
  20. Based the IDDT information RFIC the tube level fault modeling and test vector research,TN43
  21. The Design of Digital Electronic Control System of Breast X-ray Machine,TH774

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Semiconductor technology > Semiconductor diode > Diodes: process sub- > Hot carrier diode
© 2012 www.DissertationTopic.Net  Mobile