Dissertation > Excellent graduate degree dissertation topics show

Study on the Maize Straw Compression and Stress Relaxation Properties during High-density Compressed

Author: WuHaiHui
Tutor: WangChunGuang
School: Inner Mongolia Agricultural University
Course: Agricultural Mechanization Engineering
Keywords: Baler Corn stalks Stress relaxation Hydraulic cylinder
CLC: S817.11
Type: Master's thesis
Year: 2010
Downloads: 74
Quote: 1
Read: Download Dissertation

Abstract


This paper study the broken corn stalks which are with about 20% of moisture. Using high density baler as the experimental prototype and promoting the frequency of compression by improving the device in order to investigate the stress relaxation characteristics of the invariable density region between compression force and density in the compression chamber under the condition of open-compression. Carrying out modeling of hydraulic system by using the ADAMS software to get the simulation curves of compression speed and hydraulic impact of the baler. Then to provide theoretical supports for further design of baler.To get the compression forces and amount through applying pressure transducer and displacement transducer and obtain the changing process of compression force and density by calculating. The main contents of this study as follows:(1)The feeding amount to study factors in the hydraulic pressure, high density on the bundle of feeding amount 4kg for the shattered corn straw are studied, and the compressive strength of compression indoor compressed density of the relationship between the data analysis, the different compression, different density curves and density compressed compressive relation curves.(2) Selecting feeding amount and compression test, the frequency of factors to rub up corn straw in the compression indoor area density stability test, the stress relaxation process of compression stress relaxation phenomenon, to obtain the constitutive equations for the future, the length of the compression chamber machine design provides theory basis.(3) Based on virtual prototype technology, high pressure on the hydraulic test device for hydraulic oil bundles of virtual prototype design simulation, the compression speed and compression piston hydraulic impact curves of three different area of the hydraulic oil cylinder analysis and comparison of the hydraulic system is optimized.

Related Dissertations

  1. Microwave - steam explosion pretreatment of corn stover Joint Research,S216.2
  2. Simulation in the Hydraulic System of High Density Baler Based on Compression Experiment,S817.11
  3. Experimental Study on Residual Stress Behavior of LDPE Ultrahigh Pressure Tubular Reactor,TQ325.12
  4. The Study on the New Type of Self-locked Hydraulic Cylinder,TH137.51
  5. The Research of Forage Harvest Mechanization Technology Experiment,S233.73
  6. Hydraulically driven winch operation and performance of the design,TH21
  7. Experimental Study of Dry Fermentation Technology for Straw Biogas Production,S216.4
  8. Straw bale silage corn stalks whole equipment and key parts of the design,S817.117
  9. Study on the Pressure Distribution in the Baling Room in the Course of High-Density Baling,S225.22
  10. Research on the Compression of Straw of Baler,S225
  11. Research on Control Strategy and Its Application of Ring Gate for Hydraulic Turbine Electro-hydraulic Proportional Synchronous System,TV734.1
  12. The Design & Research of Automatic Transmission Load Simulator,TH132.46
  13. Experimental Research on Restrained Shrinkage Cracking Properties of Pumping Concrete,TU528
  14. Studies using in vitro gas production technique ruminal fermentation of corn stalks factors,S816.32
  15. Synchronization Control Strategy Applied in Two Cyli Nders System of Rolling Mill,TG333
  16. Cellulase producing strain and corn straw saccharification and fermentation of lactic acid,TQ929
  17. Combination of different quality roughage in vitro fermentation parameters , summer dairy production performance and blood biochemical indexes,S823.91
  18. Study on Stress Relaxation of Polymer and Fractional Maxwell Model,O631.13
  19. Finite Element Methods for Articular Cartilage of Biphasic Porous Medium Nonlinear Model,R318.01
  20. Study on Ethanol Production from Xylose by a Recombinant Yeast,TQ923

CLC: > Agricultural Sciences > Livestock, animal medicine,hunting,silkworm,bee > General Animal Science > Animal husbandry machinery and equipment > Feed harvest processing machinery > Hay and silage harvester
© 2012 www.DissertationTopic.Net  Mobile