Dissertation > Excellent graduate degree dissertation topics show

The Foundation of Three-dimensional Finite Element Model for Fixed Bridge of Posterior Teeth Restored with Different Post-and-core Materials and Stress Analysis of Abutments

Author: XingZuoNing
Tutor: HuShuHai
School: Dalian Medical University
Course: Clinical Stomatology
Keywords: Second mandibularmolar Post and core technique Stress Analysis Three-dimensional finite element models
CLC: R783
Type: Master's thesis
Year: 2010
Downloads: 78
Quote: 0
Read: Download Dissertation

Abstract


Objective:To found a three-dimensional finite element model for fixed bridge of posterior teeth restored with different post-and-core materials, and compare the stress distribution of mandibular second molar restored as abutment of fixed bridge under the two loading conditions, and provide experimental basis for clinical applications.Method:A healthy adult male volunteers with a complete dentition, normal occlusion, no significant periodontal disease and alveolar bone loss, no posterior teeth defects and obvious wear was selected. The lower jaw data obtained by CT scanning were inputted into the Mimics software, and setted appropriate threshold values of tissues. According to the different gray-scale of images, two-dimensional contours of crown, root and pulp were delineated, and fitted the date segmented by Mimics software for extracting tissues required and building 3D models. The model was saved as IGES format. The model data of the mandibular second premolar and second molar were read in Ansys software (Ansys Inc. USA), and given the part of entities to the respective material properties. The model was meshed automatically and manually, and divided into different regions of structure and physical properties by the Boolean operation, and setted the material properties, boundary conditions as requested. Three-dimensional finite element model obtained were applied load to study dentin stress extremum and distribution of abutment. Results:The three-dimensional finite element model founded in this study had reasonable mesh and similarity.Mandibular second molar as fixed brige abutment of the dentin stress extremum from the biggest to the smallest were as follows:the glass fiber post> Ceramic post> cast titanium alloy post and core>cast nickel-chromium alloy post and core.High stress region appeared in the inside of cast Ni-Cr alloy post-and-core and dentin near root furcation and tip of post; and in the inside of cast titanium alloy post-and-core and dentin near root furcation and mesial cervical margin; and in mesial cervical margin for glass fiber post-and-core and ceramic post-and-core.Conclusion:Using CT computed tomography combined with reverse engineering software and ANSYS finite element analysis software to establish a three-dimensional finite element model for fixed bridge of posterior teeth restored with different post-and-core materials is accurate, effective and feasible. The model can better simulate the clinical practical situation, calculated results are reliable and comparable.When posterior teeth were restored with post-and-core materials as abutments of fixed bridge, the elastic modulus of material used should be close to dentin.

Related Dissertations

  1. Large opening pressure vessel structural finite element analysis and strength design,TH49
  2. Painting robot design and control method of writing,TP242.3
  3. Tube heat exchanger thermal and stress analysis,TQ051.5
  4. Analysis and optimization of pipe roof rig drilling agency,U455.3
  5. Mechanical Analysis of the Deck Paving on the Cement Concrete Bridge with Different Waterproof and Cohesive Layers,U443.33
  6. Functionally graded plate with a hole stress analysis,O344.1
  7. Structural Static Force Analysis and Optimum Design of High Pressure Vessel for CNG Based on ANSYS,TE972
  8. The Influence Analysis of Stiff Skeleton on the Closure Section of the Bridge by Cantilever Construction Method,U445.4
  9. The Basic Process Research of Directly Plasma Forming Functional Gradient Materials,TB34
  10. The Seismic Response Analysis of Full Containment LNG Storage Tank,TU352.11
  11. Mechanical Property Study of T-head Unbonded Prestressed Steel Reinforced Concrete Beam,TU398.9
  12. The Study on the Impact for a New Edges Structer of Asphalt Concrete Pavement,U416.2
  13. Reliability Analysis of Hard X-ray Modulation Telescope’s High Energy Electronic System,TH743
  14. Synthetical Design on Multi-parameter of Three-ring Gear Reducer,TH132.46
  15. Study of Intensive Analysis and Finite Element Simulation on Engineering Ceramics Impeller of Pulp Pump,TH311
  16. The Three-dimensional Finite Element Analysis on Stress Distribution of Tooth After Root Canal Preparation with Different Instrument,R781.05
  17. Finite Element Research of U-Tube Heat Exchanger with Self-Tight Seal,TQ051.5
  18. Service Life Analysis of the High Temperature Superheater Outlet Header in a 600MW Supercritical Boiler,TM621.2
  19. Research on Aseismatic Behavior of R.C. Frame with Special-Shaped Columns,TU352.11
  20. Study on Local Stress Analysis of Concrete Filled Steel Tube Butterfly Arch Bridge,U448.22
  21. Analysis on Arch Axis Parameters and Local Stress for Special-Shap Arch Bridge,U441.5

CLC: > Medicine, health > Oral Sciences > Oral orthotics
© 2012 www.DissertationTopic.Net  Mobile