Dissertation > Excellent graduate degree dissertation topics show
Investigation on Diffusion Mode of Fugitive Heavy Particle and Its Application
Author: ChenZhiLong
Tutor: CongXiaoChun；LiuYuFeng
School: Shandong University of Science and Technology
Course: Heating,Gas Supply, Ventilation and Air Conditioning Engineering
Keywords: particle source in open storage yards heavy particles dynamics approach particle diffusion
CLC: X513
Type: Master's thesis
Year: 2011
Downloads: 94
Quote: 0
Read: Download Dissertation
Abstract
|
As one of the most representative pollutant, particulate pollution is not only serious harmful to public health, but also increasingly becoming the key factor restricting the improvement of the urban environmental quality in China. Compared with organized particulate pollution, researches on dust emissions released from open sources develop slowly and many urgent problems are needed to be solved. Nowadays, fugitive dust emissions generated by stockpiles in the open storage yards of mineral and industrial sites, construction locations and habour areas, etc, are becoming the dominant portions of air pollution, and subsequent atmospheric dust dispersion has brought about many ecological and economical problems.This paper, taking open stockpiles as an example, integrates theoretical analysis, numerical method and experiment approach, to study particle behavior. Then diffusion mode for heavy particle is put forward. Firstly, as a fundamental basic parameter of particulate pollution, quanlitative estimation of dust emissions has been always focused. Therefore, the further investigation is carried out in the present study. Pickup velocities of particle and dust emissions are measured in wind tunnel. Empirical relationship for dust emissions has been established based on experimental data. Non-dimensional parameters expressing the pickup velocity are obtained, and Reynolds and Archimedes numbers are selected to adequately describe the pariticle lift-off phenomenon.Secondly, aerodynamics method, based on US EPA mode, is used to estimate dust emissions in open storage yards. The calculation procedure is adjusted and friction wind velocities, the most effective variable, are predicted. Meanwhile, the simulated values over exposed subareas are validated against EPA results and flow patterns over the stockpiles are satisfiedly achived. From this view, the present study has provided a new method for friction wind velocity, which plays a dominant role in the assessment of dust emissions. This actual aerodynamical way provides easier accessibility than US EPA standards to obtaining the quantification of dust lift from exposed surfaces. It enables to estimate the dust eroded with higher preciseness.Then, regarding to the art computational fluid dynamics (CFD) method, force analysis of single particle is discussed. DPM dust diffusion model is proposed. The results are compared with experimental data tested in wind tunnel to valid the model. Taking Gaussian model as a constract, the error analysis is performed. This mode favours to predict heavy particles uptake from stockpiles storing in open areas.Finally, with the help of the diffusion mode, a simulation based on the actual port is undertaken. Dust emissions are determined and the concentration of particulate dispersion is evaluated. A clear understanding of the influence of wind erosion is obtained and feasible solutions are also provided. The present paper has demonstrated a quantitative measurement for dust emissions of inorganized source in the open yards.
|
Related Dissertations
- Investigation of the Particle Transport in Developing Flat-Plate Boundary Lavers with a Hemispherical Roughness Element by Direct Numerical Simulation,O359
- Direct Numerical Simulation of Particle Dispersion in the Temporal Wake of Multiple Circular Cylinders in Gas-Particle Flows,O359
- Study on Electrochemical Properties of Cathode Materials of Lithium Ion Battery in Aqueous Solution,TM912
- Direct Numerical Simulation of Particle Dispersion in the Temporal Wake of a Circular Cylinder & Numerical Investigation of a New Method for Protecting Bends from Erosion in Gas-Particle Flows,TK123
- Yangtze River basin to achieve sustainable development of eco- environmental management decision-making model,X171
- Flow characteristics of gas-solid flow around a cylinder PIV Measurement and Research,O359
- Organization and Simulation of Mercury Control System by Activated Carbon Injection in Coal-fired Power Plant,X701.3
- Fischer-Tropsch synthesis catalyst reactor kinetics mathematical simulation,TQ529.2
- Gas-solid flow around square cylinder PIV experimental study on flow characteristics,O359
- Experimental Study and Mechanism Analysis on Particle Spray Agglomeration from Coal Combustion,X513
- Study on the Retrieval of Aerosol Optical Thickness Based on HJ and MODIS Data,X513
- Wind turbulence characteristics of the bulk particulate matter pollution impact study wind erosion,X513
- Pollution Characteristics of PAHs in PM10, Huainan City,X513
- Study on the Analysis of Characteristics and Measures of Pollution Control of the Atmospheric Dust in Hangzhou Economic and Technological Development Zone,X513
- Composition and Sorce of Atmosphere Aerosol Water Soluble Ions over the China Coastal Seas,X513
- Study on Regularity of Dust Transport Based Upon Induced Wind,X513
- Experimental Study on Capture for Aerosol with the Mini-cyclone,X513
- Chemical Characteristics of Fine Particulates during Air Pollution Episodes in Autumn of Shanghai, China,X513
- Study on the Impacts of Aerosols on Surface Ozone in Shanghai,X513
- Urban dust pollution control management interventions,X513
- Numerical Simulation of the Particle Transport and Deposition in Human Tracheobronchial Airways,X513
- Source Apportionment, Concentration Prediction, and Meteorological Effect of Particulate Matter (PM10) in Urban Air,X513
CLC: > Environmental science, safety science > Environmental pollution and its prevention > Atmospheric pollution and its control > Particulate pollutants
© 2012 www.DissertationTopic.Net Mobile
|