Dissertation > Excellent graduate degree dissertation topics show

Theoretical Analysis of Bag Filter Reformed from Electrostatic Precipitator and the Numerical Calculation for the Flow Field Distribution in Bag Filter

Author: KeLiaoYing
Tutor: XiangXiaoDong
School: Wuhan University of Science and Technology
Course: Environmental Engineering
Keywords: Bag Filter Diffusion effect Gas-flow Distribution Numerical Calculation
CLC: X701.2
Type: Master's thesis
Year: 2008
Downloads: 169
Quote: 0
Read: Download Dissertation

Abstract


As the requirement to environmental protection is getting higher and higher, ESP is faced with reformation. The ESP designed according to old criteria fails to meet the new emission regulations, because it can not increase electric field due to the limitation of ground. And as the development of filter material and mature filtering technology, bag filter’s market share in the precipitation industry increases greatly. It’s of very good environmental and economic benefit to replace ESP with bag filter. The new design will affect the distribution of gas flow, so it is necessary to research the gas-flow distribution after the reconstruction of ESP.According to concentration distribution of the pollutant diffusion on cylinder in the static fluid,build diffusion model on the base of Fick first low and flow function in Lame fields to get concise efficiency expression, and further discuss the relation between filter efficiency and filter velocity.In addition, this paper uses computer flow dynamic software (CFX) to solve flow field distribution inside the bag filter. The numerical calculation of gas flow distribution inside bag filter is accomplished through simplifying the physics model of bag filter, ascertaining the types of grid ,adjusting grid density, choosing turbulent flow model, calculation method and data disposing method and so on. The result indicates that the distribution of gas-flow entering the filtrating house is very asymmetrical. This not only decreases the efficiency of filtration, but also severely shortens the natural life of fabric. According to the result of numerical calculation, the article improves the distribution of the gas-flow by setting board that can lead gas-flow. The second and the third results of numerical calculation indicate gas-flow distribution is much better than before after setting board. It provides good instruction to the design of structure optimization.

Related Dissertations

  1. Study on the Properties of Corona Plasma Discharge Atomization and Design of Sprayer Heads,S491
  2. Numerical Calculation of Electromagnetic Field and Temperature Field for 1000MW Fully Air-cooled Hydro-generators,TM312
  3. Studies of the Balcony Greening’s Forms’ Effects on the Air Temperature and Relative Humidity of Indoor,TU119
  4. Research on Safe Shutdown Time of Heavy Oil Pipeline of Panjin Pipeline in Liaohe Oilfield,TE832
  5. Research of the ASP Flooding Well Inflow Performance Based on Fractal Theory,TE357.4
  6. Research on High Fidelity Simulation Test for Bag Filters CFD Design and Optimization,X701.2
  7. Research on Simulation-Based for Bag Filter Virtual Test Method and Application,X701.2
  8. Research of Electromagnetic Tracking Experimental System for Medical Application,TN966
  9. Numerical Simulation and Analysis of Three Dimensional Flow in Turbines,V231.3
  10. Numerical Simulation and Validity Research on the Distribution Characteristics of Discrete Particles in Hot Exhaust,V231
  11. Study of Design Method and Suitable Structure of the Asphalt Pavement Under Over-load Condition,U416.217
  12. Research on the Dynamic Performance and Numerical Simulation of Saturated Soft Soil under Traffic Loads,U412.22
  13. Gas Detection System Parameter Optimization and Experimental Research,U467.48
  14. Numerical Simulation on Fluid Dynamic of Natural Supercavitation Projetile,U661.1
  15. A Study on Simulation Accuracy of Ground Source Heat Pump,TU831.6
  16. The Finite Element Analyses of RC Beam with Prestressed CFRP Sheets,TU375.1
  17. Coupling Thermal Analysis of Combuster with Complex Channels in Ground Test,TK124
  18. Numerical Calculation and Research on Fuel Injection Control Unit for the Two Stroke Gasoline Engine,TK413
  19. Numerical Calculation of Wind Turbine Flow Field and Design for Blades,TK83
  20. Modeling and Numerical Analysis of Foil Hydrodynamic Thrust Bearing Used in Turbine Generator,TM31
  21. Containing concealed an empty area of the open pit slope investigation and stability analysis,TD854.6

CLC: > Environmental science, safety science > Processing and comprehensive utilization of waste > General issues > Exhaust gas processing and utilization > Smoke and dust
© 2012 www.DissertationTopic.Net  Mobile