Dissertation > Excellent graduate degree dissertation topics show
Time Interval Measurement Based on Time-Space Relationship
Author: LiLin
Tutor: ZhouWei
School: Xi'an University of Electronic Science and Technology
Course: Measuring Technology and Instruments
Keywords: Time-Space Relationship Time-to-Digital Converter Delay Line Transmission Line Coincidence Detection
CLC: TM935
Type: Master's thesis
Year: 2008
Downloads: 101
Quote: 8
Read: Download Dissertation
Abstract
|
This paper presents a novel method for measuring time interval. The time-space relationship is used to improve the resolution and single-shot precision.The speed of electromagnetic signal traveling in free space is a natural constant, which is of high value and high stability. Therefore, utilizing the transmission line of certain line as delay line to quantize the time interval features high resolution and high precision. The start signal of time interval is delayed by differential units composed of transmission line, which is connected in series. Then the coincidence detectors are placed at every delay unit to detect the coincidence of the delayed start signal and stop signal. In this way, the time is converted to the length. The point where the delayed start signal gets coincident with stop signal reflects the value of the measured time interval. In this paper, the block diagram of system is described, as well as the system model. The errors in the system are analyzed followed by the methods for their correction. Moreover, the contradiction between high resolution and measurement range is analyzed, and inserted buffers for regenerating signal, active delay line and counter are used to work it out.Based on the time-space relationship, a prototype is realized using microstrips as delay line on the printed-circuit board and edge-triggered master-slaver D flip-flop as coincidence detector. The prototype works on the ECL level. The resolution of the prototype is 250ps.With CMOS technology, a time-to-digital converter is designed, which uses integrated transmission line as delay line and D flip-flop as coincidence detector. In addition, the buffer, delay-locked loop and counter is designed to enlarge the measurement range. A simulation of the chip is performed with the software HSPICE. The resolution of 37ps is obtained.
|
Related Dissertations
- Measurement of the Surface Impedance of the High Temperature Superconducting Thin Films with Coplanar Transmission Line,O484.5
- Single response microwave photonic filter design,TN713
- Transmission line icing icing mitigation technology research and online monitoring system design and implementation,TM755
- Microwave Filter Research Based on Left-handed Materials (LHMs),TN713
- Study on Online-Monitoring Technology for Transmission Line Icing,TM75
- Research and Implement of Precise Time-interval Measurement Based on FPGA,TN791
- The Synthesis and Design of the Microstrip Open-loop Filter,TN713
- Transmission line characteristics of study based on the linear boundary element method,O441.4
- Optical Bistability Based on Superconducting Qubits,O431.2
- Study on the Lightning Protection of the Regional Transmission Grid,TM862
- Research on the Theory of the Transmission-line Metamaterials and Their Applications,O441.6
- Directional Comparison Pliot Protection for Six-phase Transmission Lines,TM773
- Research on WAMS Based Fault Location for High Voltage Transmission Network,TM755
- The Study of Transmission Line Security Monitoring System,TM76
- Performance Analysis of Lightning Overvoltage on GIS Substation,TM863
- Study on the Lightning Protection Performance of Shielding Failure for Inner Mongolia 500kV Transmission Line in Mountainous Area,TM862
- EHV transmission line transient signal detection and classification method,TM935
- Study on Dual-mode Band Pass Filter with Complementary Conducting Strip Line and Defected Ground Structure,TN713.5
- On-line Monitoring Method of Ground Fault for Power Transmission Line Based on the Sectional Transfer Function,TM76;O174
- Left-handed Structure and Its Application in Filter,TN713
- The Study on Characteristics of Tunable Integrated Devices Based on the SGDBR Laser,TN248.4
CLC: > Industrial Technology > Electrotechnical > Electrical measurement techniques and instruments > Frequency, waveform parameter measurement and instrumentation
© 2012 www.DissertationTopic.Net Mobile
|