Dissertation > Excellent graduate degree dissertation topics show

Research on Strength and Stiffness of Corroded Reinforced Concrete Beams

Author: LiZuo
Tutor: ZhangJianRen
School: Changsha University of Science and Technology
Course: Bridge and Tunnel Engineering
Keywords: corrosion-beams accelerated corrosion finite element plane section assumption strength stiffness
CLC: TU375
Type: Master's thesis
Year: 2008
Downloads: 307
Quote: 6
Read: Download Dissertation

Abstract


Concrete durability is one of the world-wide concerned problems in the field of the structure engineering. Corrosion of reinforcement steel bar is already recognized as one of the most important factors effect the durability of reinforced concrete structures, it is particularly important to research the change laws of the mechanical properties of the corroded steel bar. Combining with the National Natural Science Foundation of China(No.50478032), following researches were done in this thesis:1) By analysis of test data of 48 beams with accelerated corrosion,the damage mode and feature of crack with different corrosion-rate of beam were obtained and the distributing character of concrete strain in the section in midspan of beam . Analysis of combined reduction coefficient was done. By fitting data, the expression of combined reduct- -ion coefficient was obtained.2) The conclusion has been obtained that the strain of corroded steel bar and concrete no longer fit in with the assumption of plane section through the analysis of the strain data, the strain relation of steel bar and concrete in the mid-span section of variously corroded beams at ultimate has been obtained.3) Through the analysis of the damage mode of corrosion-beams.It is known that the corrosion-beams has different damage mode with different corrosion-rate. At the same time the strain between bar and concrete at the same place with bar is different, all this factors above were considered. The strength of corrosion-beams were analyzed and finally used test data to check the conclusion.4) By the software of Msc.Marc,the strength of corrosion-beam was analyzed by finite element. The method of simulating corrosion-beam was clearly introduced. How corrosion-rate influenced strength, bond stress,strain between concrete and reinforcem- -ent, feature of crack were discussed .5) Through the analysis of test data, the way to calculate the stiffness of corrosion-beam was presented by modifying the formula presented by code.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  3. Study on Springback of High-Strength Steel Stamping,TG386
  4. EDM Electrode Wear Mechanism and Control Research,TG661
  5. Flow Field Numerical Simulation and Performance Analysis for the Conical Hydrostatic Bearing,TH133.36
  6. The Theoretical and Experimental Research on Preload and Supporting Stiffness of a Wire Race Ball Bearing,TH133.331
  7. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  8. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  9. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  10. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  11. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  12. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  13. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  14. Experimental Study of Porous Composite Materials on the Base of Recycled Concrete Powder-Cement,TU528
  15. The Experimental Research on Regeneration Aggregate and Proportioning of Recycled Concrete Brick,TU528
  16. Design of Testing Equipment for Electronic Products,TN06
  17. The Research on the Formation and Application of Carbonaceous Mesophase,TQ127.1
  18. Recycled aggregate semi- rigid concrete preparation and molding of test,TU528
  19. Study on Preparing the High Performance Fiber and Nonaporous Fiber by High Viscosity Nylon-6,TQ342
  20. The Influence of the Core Strength Training on the Balance of the Junior Wushu Athletes,G852
  21. S-lay Installation Analysis for Deepwater Pipeline,TE973

CLC: > Industrial Technology > Building Science > Building structure > Concrete structure,reinforced concrete structure > Reinforced concrete structures
© 2012 www.DissertationTopic.Net  Mobile