Dissertation > Excellent graduate degree dissertation topics show

Energy Distribution Strategy and CAN Communication about the HEV Based on CVT

Author: XiaoLinHua
Tutor: ZhouYunShan
School: Hunan University
Course: Vehicle Engineering
Keywords: Hybrid Electrical Vehicle (HEV) Energy Management Strategy Controller Area Network(CAN) Continuous Variable Transmission(CVT)
CLC: U469.72
Type: Master's thesis
Year: 2008
Downloads: 195
Quote: 6
Read: Download Dissertation

Abstract


The Hybrid Electrical Vehicle is the feasible outcome from new and traditional Automobile technique. It not only has the advantages of low emission and high efficiency of Pure Electrical Vehicle, but also has the performances of long running mileage and fast fuel supplement in tradition internal-combustion engine automobile. Accordingly, Hybrid Electrical Vehicle becomes the feasible scheme for saving energy and protecting from environment in this century.In this paper, the worldwide development of HEV is analyzed. Along with the characteristic and superiority of combining HEV and CVT, the importance of developing HEV in China is presented. The typical HEV power assembly system is deeply analyzed on the basis of the development and study of the currently power assembly system. The mathematics model of combined coupling power assembly is built in combination with experimental data and theoretical analysis of the experimental bench. The professional simulation platform of CVT-HEV is designed and built by using MATLAB/SIMULINK simulation language.Then, the Hybrid Electric Vehicle Energy Management control algorithm based on logic threshold control method is studied on the CVT-HEV simulation bench. The control flow charts of the main controller energy management algorithm is written on the basis of the project. At the same time, the control algorithm based on fuzzy control has been studied on. The results and graphs of simulation based on CVT-HEV Energy Management Strategy which can be used for guiding the experiments are contended in the paper.Finally, the network’s topology of CVT-HEV power assembly control system is analyzed. Considering the practical project, the CAN Bus controller network communication protocol of HEV is established on the basis of J1939 protocol. Later on, the hardware and software of CAN module and the contronl node of liquid crystal display are developed.

Related Dissertations

  1. Design and Realization of Lithium-Ion Power Battery Management System,TM912
  2. Delay characteristics of the fuel cell and fuel cell - battery hybrid power system studies,TM911.4
  3. The Research of Energy Management Strategy for Plug-In Hybrid Electric Vehicles,U469.7
  4. Study on Energy Management Strategy of Parallel Hybrid Electric Vehicle,U469.7
  5. Multi-channel CAN-Ethernet Gateway Design and Implementation of Embedded,TP273
  6. A Design and Hardware Implementation for Explosion-proof Remote I/O System Based on CAN-bus,TP273
  7. Design and Research of Formation Water Resistivity Logging Tool,TP216
  8. Research on the Optimized Control Strategy for the Synergic Electric Power System on HEV,TN86
  9. Research on the Energy Management Strategy of PHEV Based on PSO and Neural Network,U469.7
  10. Fuzzy Logic Control Strategy of Energy Management System for Hybrid Electric Vehicles,U469.7
  11. Study on Application Layer Protocol of Pavers Based on CAN-Bus Communication System,TP273
  12. Analysis and Simulation of Parallel Hydraulic Hybrid Heavy Vehicle,U469.65
  13. Study on the Powertrain Parameters Metching and the Energy Management Strategy Optimization of a HEV,U469
  14. The Design of Infrared Oil Meter’s Hardware and Software,TH744.41
  15. The Design of Monitoring System Based on Virtual Instrument Technology and CAN Bus,TP274.4
  16. The Application and Research of CAN Bus in Car Body Control System,TP273.5
  17. Battery Management System Based on CAN Bus,TM912.9
  18. Locomotive Remote Monitoring System Design of the Protocol Conversion Device,TP274.4
  19. CAN bus in the DC motor speed control system application,TM33
  20. Design of Sensor Module in Multi-parameters Drilling Instruments,TP212.9

CLC: > Transportation > Road transport > Automotive Engineering > A variety of automotive > Various energy vehicles > Electric vehicles
© 2012 www.DissertationTopic.Net  Mobile