Dissertation > Excellent graduate degree dissertation topics show

Research and Development of Data Acquisition and Processing System for TPMS Based on MATLAB/xPC

Author: LiuXiaoLi
Tutor: HanJiaPeng
School: Shandong University of Technology
Course: Vehicle Operation Engineering
Keywords: Tire Pressure Monitoring MATLAB xPCTarget Data Acquisition and Processing
CLC: U463.6
Type: Master's thesis
Year: 2008
Downloads: 520
Quote: 5
Read: Download Dissertation

Abstract


Safe driving of motor vehicles has always been the focus of attention problems. Car at high speed , the flat tire is one of the main reasons that cause a vicious accident . Tire under normal pressure , especially under low pressure for a long time high speed is the most important reason for causing puncture . How to avoid tire failure , it is a problem to be solved . The tire pressure monitoring system (TPMS) came into being, the countries set off the climax of the study . Indirect tire pressure monitoring system , by virtue of its low cost , stable performance , easy installation advantages will surely get the trust of consumers and universal . To design a high precision indirect tire pressure monitoring system , large amounts of data need to be collected , the relevant parameters of the algorithm were compared and improvements , and to find the most accurate algorithms and parameter values ??. Widely used in the field of scientific research , the powerful MATLAB software simulation toolbox Simulink , Real -time Workshop xPCTarget research and development of needle husband pick a tire pressure monitoring system (TPMS) data acquisition and processing system . Firstly Simulink toolbox to establish TPMS system simulation model parameters required treatment ; then build the the MATLAB / xPCTarget - based hardware platform , and combined with the establishment of the simulation model to complete the development of the entire data acquisition and processing system ; Finally , through real the vehicle test , the real-time data acquisition, the acquisition and processing data capabilities of the system for authentication . The entire system data acquisition , modeling , data processing and real-time simulation integration , be able to adjust the parameters , optimization algorithm, modular design TPMS . These advantages have laid the foundation for the design of the TPMS . Using the xPC the signal tracking mode , obtaining the signal in real - time during the operation of the program and for visualization ; also interactive parameter adjustment , to facilitate the observation of parameters of the model to verify the advantages of this system . The system can also enter other vehicles signal the completion of data acquisition , display , record , curves copy functions , plus friendly interface , the system is also well suited for teaching demonstration .

Related Dissertations

  1. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  2. Application Research of Digital Image Processing on Container Inspection,TP274.4
  3. S-lay Installation Analysis for Deepwater Pipeline,TE973
  4. The Research and Application of Software Reliability Test for User Right Management System,TP311.53
  5. Research and Application of Safety Assessment Method Based on Neural Network,X937
  6. Research of DSP-based Real-time Demodulation Method of One-frequency Laser Interferometer,TN911.3
  7. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  8. Research on Analytical Method to Calculate the over Voltage and Surge Impedance of Tower under Lightning,TM863
  9. Mining resources based on genetic algorithm optimization model of,O224
  10. SAR interferometric method for optimal selection,P225.2
  11. Design and Simulation on MDOF Robotic Prosthesis’s Shoulder,TP242
  12. The Simulation Technology Study of Marine Gas Turbine Based on Modular Modeling,U674.703
  13. Study on Industrial Boiler Water Level Control System,TP273
  14. The issue of information sharing between the manufacturer of the same level in the supply chain environment,F406;F224.32
  15. A Multimedia Courseware Study Based on Matlab Simulation,TP317.4
  16. The Realization of Weight Function under MATLAB,TP319
  17. Circuit Design and Simulation of Proportional Valve Controller Based on CAN-BUS,TP273.5
  18. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
  19. Research on the Virtual Prototype Platform of Disc Coreless Permanent Magnet DC Motor,TM33
  20. An Acoustic System for the Detection of Sugar Content and the Hollow in Watermelon,TS255.7
  21. The Application of ARM on SVG,TM761

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Electrical equipment and accessories
© 2012 www.DissertationTopic.Net  Mobile