Dissertation > Excellent graduate degree dissertation topics show

The Research of Control about Rotor System Utilized by Passive Electromagnetic Damper

Author: CaoDan
Tutor: ZhangXiaoLong
School: Xi'an University of Architecture and Technology
Course: Mechanical Design and Theory
Keywords: Rotor Dynamics Transfer Matrix Electromagnetic damper damping coefficient swing
CLC: TH113.1
Type: Master's thesis
Year: 2008
Downloads: 111
Quote: 1
Read: Download Dissertation

Abstract


Rotating components are widely applied in such machines as aero-engines. Industrial compressors and electromotor. It plays important role in such national economic fields as power, aviation, machine, chem., spin and so on. The vibration can seel by unbalance of the rotor system is especially strong at article speed. So it is of significance to research Rotor Dynamics.Firstly, the author of the dissertation analyzes dynamical characteristic of the single-disc and studies the relation of critical speed, and immanent frequency of the rotor bearing system, and analysis the phenomenon and character of the whirl, and simply introduce the academic knowledge about the balance of the rotor bearing. And the author introduce the Transfer Matrix Method and the Riccati Transfer Matrix Method which can be applied to analyze and calculate the critical speed of the rotor, and writes the programs of Matlab software which checks up the Riccati Transfer Matrix Method’s result of calculation. Secondly, the author introduces and compares the whole control bag of tricks in the base that the doctors’ studies controlled the vibration of rotor all the world. The structure of it is similar to that of the active magnetic bearing. The damper works with DC so that sensor and closed loop control are not needed. The air gap between rotor and stator is changed with rotating of rotor. As a result, the electromagnetic field intensity is changed accordingly and fluctuating current in the damper coil is created. Damping force is mostly produced because of the phase difference between fluctuating current and displacement of rotor. The formulas of fluctuating current and damping coefficient are deduced theoretically, and the calculated results are consistent with the experimental results. Finally, in the text, the electromagnetism damper is used in the system of single-disc, and analyses the swing affect and degree while the system gets across the critical rotate speed with the electromagnetism damper, and approves the electromagnetism damper’s value applied in praxis.

Related Dissertations

  1. Study on Characteristics of Contiuous Fiber-Reinforced Metal Matrix Composites under Hypervelocity Projectile Impact,TB332
  2. Design of Testing Instrument for Static Banlance of Gyroscope Witah Photoelectric Method,TH877
  3. Research on the Dynamics of Rotor-Cylindrical Bearing System and Rotor-Elloptical Bearing System,TK263.6
  4. Initial Rotor Position Estimation for PMSM,TM341
  5. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  6. Study on the Influence of Drive Strategies on the Loss in AC Permanent Magnet Motor,TM351
  7. Modeling Analysis and Slip Estimation for Lunar Rovers,TP242
  8. Research on Control of the Four-Rotor VTOL Helicopter,TP273
  9. Reaserch on Dynamics for Fast Walking of Biped Robot,TP242.6
  10. Analysis and Control of 6-DOF Electrical Driven Parallel Manipulator,TP242.2
  11. The Drying of Tilapia Fillet Using Supercritical Carbon Dioxide,TS254.4
  12. Research on Structural Vibration of Steam Piping System,TK284.1
  13. Electromagnetic Properties of the Planar Waveguide with Left-Handed Materials,O441.6
  14. Influence of Nitrate Concentrations on the Production of N2, N2O, NO, and CO2 by Soil Cores During Anaerobic Incubation,X131.3
  15. Water in oil emulsion of water hit the harmonic the demulsification dynamics analysis and its mechanism,X703
  16. Alpine Meadow nitrogen mineralization and microbial Mechanism,S812
  17. Study of the Tunnelling Laneway Drilling and Anchor Rope Installation Device,TD353
  18. On Repetitive Control Strategies for SPWM Inverters,TM464
  19. Direct Torque Control of Winding Induction Motor,TM343
  20. Design of Image Inspection Subsystem of the Horizontal Industrial CT-DR,TP391.41
  21. Study of the Mechanical Strcture of a De-Icing Robot for 220kV Transmission Lines,TP242

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanics (mechanical design of the basic theory ) > Mechanical kinetics > Mechanical vibration
© 2012 www.DissertationTopic.Net  Mobile