Dissertation > Excellent graduate degree dissertation topics show

Study on a New Method for Digital Transformer Protection Based on Wavelet Neural Network and FPGA

Author: ZhangXiaoMing
Tutor: GongMaoFa
School: Shandong University of Science and Technology
Course: Proceedings of the
Keywords: transformer differential protection inrush current sympathetic inrush wavelet analysis neural network FPGA PSCAD/EMTDC
CLC: TM407
Type: Master's thesis
Year: 2011
Downloads: 105
Quote: 0
Read: Download Dissertation

Abstract


In the process of building smart grid, which takes Ultra-High Voltage (UHV) as backbone network in our country, with the expansion of power system and the increase of voltage level, power equipments with larger capacity and higher voltage level are needed objectively. More and more large-capacity transformers will be put into operation, which makes stricter and stricter demands of relay protection. The traditional protection methods are under severe challenges. The long time operation experience of differential protection which has been used as the main protection of transformers shows that the transformer’internal and external faults can be distinguished effectively by differential protection. The difficult of differential protection is how to prevent the protection misoperation caused by inrush current.Starting with analyzing the transient mechanism of transformer, this paper respectively founds the mathematical models of inrush current and sympathetic inrush, and researches these inrushes quantitatively by mathematic formulas. On this basis, considering the practical situation, simulation models of inrush current, fault current and sympathetic inrush are built by professional simulation software PSCAD/EMTDC. The generation mechanism, waveform characteristics and effect factor of both inrushes are studied deeply and meticulously.Based on theoretical derivation and simulation research, this paper focuses on inrushes which exist in transformer differential protection, puts forward a new method for digital transformer protection based on wavelet neural network and FPGA:Using db5 wavelet to extract wavelet transform energy characteristic values of inrush current and fault current, and taking these as feature space of improved BP neural network pattern recognition, using the classificatory function of neural network to distinguish inrush current and fault current. In the process of neural network training, this paper adopts the LM optimized algorithm with good robustness and fast convergence. This algorithm can greatly speed up the convergence of network’s computing and reduce error of the network training. The simulations of large samples from PSCAD/EMTDC and Matlab software verify that transformer’s inrush current and fault current can be distinguished reliably by this method. According to sympathetic inrush, based on a lot of simulations, the conclusion can be drawn that its waveform has no obvious difference with the inrush current’s. A comprehensive prevention thought that wavelet neural network methods for identification combined with several preventing misoperation methods is put forward in this paper.According to the characteristics that wavelet neural network’s huge computation and high signal sampling rate, a new method that using FPGA which is a high-speed hardware platform is proposed to realize this algorithm. In this paper, several microcomputer protection hardware frameworks based on FPGA are given, feasibility of the algorithm hardware realization plan is proved, which can break the bottleneck that traditional microcomputer protection MCU can not considerate both protection speed and accuracy.In a word, the research results in this paper have high theoretical and practical value in the further improvement of transformer protection.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  3. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  4. Development of LXI Arbitrary Waveform Generator,TM935
  5. Research on Testing and Analyzing Technology for Time Parameter of Aerospace Relay,TM58
  6. The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
  7. Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
  8. Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
  9. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  10. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  11. Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
  12. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  13. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  14. Research on Feature Extraction and Classification of Tongue Shape and Tooth-Marked Tongue in TCM Tongue Diagnosis,TP391.41
  15. Study on Virtual Detector of Infrared Hyper-Spectral Image,TP391.41
  16. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  17. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  18. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  19. Research of Visual Servoing in 4-DOF Robotic Manipulator,TP242.6
  20. Research on Visual Servo System of Mechanical ARM,TP242.6
  21. Development of Serial Bus Analyzer Based on Nios,TP274

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > General issues > Maintenance,repair
© 2012 www.DissertationTopic.Net  Mobile