Dissertation > Excellent graduate degree dissertation topics show

Calculation and Analysis for Directly Buried Heating Pipeline’s Stress

Author: LiNa
Tutor: ZouPingHua
School: Harbin Institute of Technology
Course: Heating,Gas Supply, Ventilation and Air Conditioning Engineering
Keywords: directly buried installation big diameter pipe stress failure situations of pipeline internet application of“Directly Buried Heating Pipeline’s Stress Design and Analyse” directly buried installation methods
CLC: TU995.3
Type: Master's thesis
Year: 2007
Downloads: 227
Quote: 3
Read: Download Dissertation

Abstract


The directly buried installation has been applying in the heating pipeline more and more. The work pressure and the diameter of directly buried pipe are enlarging according to the broadening of the heating area.The work pressure has reached 2.5MPa, and the diameter has reached DN1000mm in heating pipeline of china. The pipeline stress design method in Technical Specification for Directly Buried Heating Pipeline Engineering in City has some restrictions, doesn’t contain the stress design method for high work pressure, big diameter pipeline. Directly buried installation’s development demands more reasonable and more general methods offered for designers to use.This paper analyzes the problems of the active stress design way for directly buried heating pipeline, brings forward solutions and directions for the problems; compares several stress design methods for directly buried heating pipeline, puts forward points for the stress design method of high work pressure, big diameter pipe. The paper also discusses the failure situations for different pipeline parts such as straight pipe, bend, angle, tee, figures out the installation ways aiming at different failure situations; works out internet application of“Directly Buried Heating Pipeline’s Stress Design and Analyse”, which can process stress design calculation for pipeline of high work pressure, big diameter; designs a project with this internet application, analyzes and adjusts the layout of pipeline and some factors of pipeline parts according to the calculation results. The stress design is simplified by using this internet application. This paper also analyses some factors in directly buried pipeline stress, the analyzing results can provide references for engineering design.

Related Dissertations

  1. Application of Additives’ Drag Reducing Technology in District Heating System,TU995
  2. Analysis and Application in Automated Balace of Heating System Based on PLC Control,TU995.3
  3. Compensation Factor of Q System Used for Residence Building,TU995
  4. Optimal Analysis of CCHP Based on All-Year Load,TU995
  5. Research on the Thermal Condition of Central Heating Network,TU995
  6. Research on Dynamic Performance of Centralized Heat-supply System,TU995
  7. Tianjin Airport Industrial Park steam pipe network simulation,TU995.3
  8. Econmical Saving Energy Operation Mode of Heating System Based on Heating Medium Temperature,TU995
  9. Coal-Fired Heating System Situation in Changchun and Energy Saving Primary Evaluation,TU995
  10. The Improvement of Heating Hydrotech System by Varying Frequency Speed Controller,TU995
  11. The design of the metering device of the heating system,TU995.3
  12. Urban Heat Remote Monitor and Control System,TU995
  13. Research on District Heating Meterage Methods of Langfang Economic and Technological Development Zone,TU995
  14. Study on the Program of District Heating in Tanggu,TU995
  15. Energy Conservation Technology Research and Improvement Measures Analyzing on a Central Heating System,TU995
  16. Design and Application of Heating Monitoring System of Daqing Oilfield,TU995
  17. The Study on Thermal Regime of the Central Heating System Setting Peak Adjusting Heat Source,TU995
  18. The Research of the Constant Pressure and Operation Adjustment of Multi-heat Sources Loop-shaped Network,TU995
  19. Application and Study on the Optimization of Central Heating Sysstem,TU995
  20. Research on the Heating Load Combination Forecasting Based on Particle Swarm Optimization,TU995
  21. Research on the Regulating Technologies of Multi-sources Heating System,TU995

CLC: > Industrial Technology > Building Science > Municipal Engineering > Urban central heating > Heat pipe network
© 2012 www.DissertationTopic.Net  Mobile