Dissertation > Excellent graduate degree dissertation topics show
Desulfurization of vacuum thermal decomposition of molybdenite
Author: ChenJie
Tutor: YangBin
School: Kunming University of Science and Technology
Course: Physical Chemistry of Metallurgy
Keywords: vacuum metallurgy molybdenite desulfurization
CLC: TF841.2
Type: Master's thesis
Year: 2009
Downloads: 65
Quote: 0
Read: Download Dissertation
Abstract
|
Our country is a big country of molybdenum resources and producing, but for the low technologyl of dressing and metal melting, the most products are molybdenum iron、high-grade molybdenite, ammonium-based, therefore a new type of industrial melting molybdenum are urgented.The current treatment process of molybdenite is mainly divided into two major categories of law and wet. Pyrometallurgical smelting is roasting molybdenite obtained the sublimation of molybdenum or get molybdenum trioxide though wet, then generated by the hydrogen reduction of molybdenum metal powder. This process has problem of environmental pollution, low recovery of molybdenum. The entire wet process is oxidation of sulfide minerals to oxide or its salts, then purification for further pure molybdenum compounds. Wet process avoid a lot of sulfur gases, improve the recovery rate of metal, but the leaching problem of cost and equipment constraints are a major factor in its development.In this paper, A new method of deal with molybdenite in vacuum to decomposition and desulfuration was proposed. Theoretical analysis and experimental research are study. Experiments show that the thermal decomposition molybdenite in vacuum can get molybdenum and element sulphur.The relationship between pressure and temperature curves calculated through the thermodynamic theory, the pressure is 10-1-103Pa when the decomposition temperature of 1000℃-1600℃.Analytical the TG and DSC date of analytical pure MoS2 decomposition in pure nitrogen. Established a reaction rate equation by using Freeman-Carroll: By the reaction equation can get that n= 3.0003, the activation energy Ea= 727.745 KJ/ mol, pre-exponential factor A= 58.77 x 1022. thermal decomposition desulfuration molybdenite in vacuum was analyzed,get the mechanism of MoS2 decompositionAnalytical pure MoS2, low-grade molybdenite, molybdenum concentrates were carried out thermal decomposition desulfurization experiment by use vacuum furnace. Analysis the influence of decomposition temperature and decomposition time. Detected residues by use of X ray diffraction (XRD), scanning electron microscopy (SEM), chemical analysis,Confirmed residues of molybdenum is the metal molybdenum.Experiments confirmed that molybdenite vacuum thermal decomposition of the desulfurization effect is clear:pure MoS2 get desulfurization rate of 97 percent at decomposition temperature 1300℃, constant temperature time 60min; low-grade molybdenite get desulfurization rate of 99 percent at decomposition temperature 1650℃, constant temperature time 60min;high-grade molybdenite get desulfurization rate of 96.5 percent at decomposition temperature 1500℃, constant temperature time 60min;The experiment draws the conclusion:desulfurization elevates along with thermal decomposition temperature elevates and decomposition time expand. Combination of power consumption that the best decomposition temperature is 1500-1600℃, constant temperature time is 60min for low-grade molybdenite, and the best decomposition temperature is 1500℃, constant temperature time is 60min for high-grade molybdenite.Therefore thermal decomposition molybdenite in vacuum is a pollution-free new metallurgical technology, it has a good prospect of application.
|
Related Dissertations
- Study of Simultaneous Desulfurization and Denitrification with Calcic-Based Absorbent in a Fixed Bed,X701.3
- Numerical Simulation of Atomization and Evaporation Processes in Multi-Spouted FGD Reactor,X701.3
- Synthesis of Benzimidazolium Ionic Liquids and Their Application in Extraction Separation,O626.23
- LF thermal state slag recycling desulfurization behavior of the process,X757
- Study on the Chimisorption Removal of FCC Gasoline Sulfur Compound,TE624.55
- Domestication of Acidithiobacillus Ferroxidans and Its Application to Bio-desulfuration of Coal,X701.3
- Research of Two-Step Chemotrophic Microbial Reactor Removing Hydrogen Sulfied from Biogas,X703
- Shale ash sintered brick sintering process fixed and sulfur sulfur release pattern of,X701.3
- Study on Desulfurization and Denitrification Integration Control Technology from Middle and Small Coal-Fired Boiler,X701.3
- Removal of SO2 and NOx by a Pilot Plant of Pulsed Corona Combined with in Situ Absorption,X701
- Study on Simultaneous Removal of So2 and No from Coal-Fired Flue Gas by NaClO2 /NaClO Compound Absorbent,X701.3
- The Preparation of Reverse Micellar Polyoxometalates and Catalytic Oxidative Desulfurization of Dibenzothiophene with Dioxyge,TE624.9
- Study of Nano-MgO Adsorbent Regeneration and the Mechanism of Simultaneous Desulfurization and Denitrification,X701
- Study on Preparation of Nano-magnesia Adsorbent and Performance of Flue Gas Simultaneous Desulfurization and Denitrification,O614.22;TB383.1
- Research of the Technology for Recycling Molybdenum in the Mo-tailings,TD954
- Influence of Aromatic and Nitrogen Compounds on Desulfurization onto Activated Carbon,TE624.5
- Study on the Retrofit and Optimization of Operation of GGH of WFGD in Zhujiang Power Plant,X701.3
- The Multi-Application and Implementation of Auxiliary Control Network in Power Plant Desulfurization Systems,TP311.52
- Low concentrations of sulfur dioxide flue gas treatment and sulfur recovery New Method,X701.3
- Research on Potential Control Flotation of Molybdenite,TD952
- Study on the Integrated Evaluation Index of Limestone Reactivity in Desulfurization Process,X701.3
CLC: > Industrial Technology > Metallurgical Industry > Nonferrous metal smelting > Rare metal smelting > Refractory metals smelting ( high - temperature molten metal ) > Molybdenum
© 2012 www.DissertationTopic.Net Mobile
|