Dissertation > Excellent graduate degree dissertation topics show

Properties and Ultrasonic Grinding Experimental Study on the Nano Ceramics Toughened by ZrO2

Author: DuanTieLin
Tutor: ZhaoBo
School: Henan Polytechnic University
Course: Materials Processing Engineering
Keywords: nano ZTA composites isopressing physical and mechanical property ultrasonic grinding differential analysis
CLC: TG580.6
Type: Master's thesis
Year: 2007
Downloads: 40
Quote: 0
Read: Download Dissertation

Abstract


This paper is mainly on the properties and ultrasonic vibration grinding of advanced engineering ceramics. Toughening and strengthening alumina with zirconia phase transition and microcrak toughening, submicron alumina-zirconia composites of different zirconia contents are prepared and the content is educed when it has the best properties and structure. Nano zirconia toughened alumina composites is prepared according to this content, and its physical and mechanical property, microstructure and toughening and strengthening mechanism are studied. The method of dry pressing and isostatic compaction are both used to prepare pure nano zirconia which is then tested with XRD, SEM and the physical and mechanical properties are also tested. The effect of different preparation technics on the properties of ceramics is researched. Finally the differential analysis of samples is proceeded to research the themal flux and weight variation and phase transition condition under the temperature between 20 and 1400 degree Centigrade. Traditional, one dimension and two dimension ultrasonic grinding experiments on samples are carried on the super precise plane grinder to research the effect of such factors as material itself, grinding depth ap, work speed Vw, wheel speed Vs, wheel granularity and ultrasonic vibration on the grinding force and grinding surface quality of composites. Material removal mechanism is researched and the grinding machining properties are valuated. The experimental result indicats that the content of zirconia and the extent of compaction are important factors that affect line shrinkage ratio. Material has the best physical and mechanical properties when the content of zirconia is 25 wt%. The porosity, water absorption and volume density of nano ZTA composites are all perfect. The mean flexural strength and fracture toughness reach 420.15±21.36 MPa and 5.22 MPa·m1/2 separately, each property of it is precede to that of submicron alumina-zirconia composites. The main crystal phase of zirconia-alumina isα-alumina and t-zirconia. The matrix has uniform and compact fracture surface, the ultrasonic grinding machining surface quality is very high and the grinding property is nice. The grinding mechanism generates in special grinding environment, and so it is affected by given factors such as grinding depth ap, work speed Vw, and wheel granularity. When the critical condition to generate brittle-ductile transition is satisfied, the grinding mode can realize the transition from brittle fracture to plastic flow. The grinding machining surface quality of nano ZTA composites outgoes submicron alumina-zirconia composites obviously. Under the condition that material composition and grinding state are both uniform, the ceramic prepared by isopressing gets better surface quality than that prepared by dry pressing, ultrasonic grinding gets better surface quality than traditional grinding, and two-dimensional ultrasonic grinding gets better surface quality than one-dimensional ultrasonic grinding.

Related Dissertations

  1. Study on Rotary Ultrasonic Machining for Brittle Materials,TG580.6
  2. An Analysis of the Construction Cost Control of Shan Ding Construction Engineering Group,F406.72
  3. Provable Security for Feistel Ciphers Containing SPN Structure,TN918.1
  4. Study on Machining Mechanism and Surface Quality in Ultrasonic Vibration Grinding of Silicon Nitride Ceramics,TG580.1
  5. Empirical Study on Regional Innovation Ability of Chongqing Based on Data Envelopment Analysis,F224
  6. Evaluation of Properties of Dendrocalamus Giganteus Culms at Different Ages,S781.9
  7. Application of Data Mining Technology in the Research of Harmaceutical Experiment,TP311.13
  8. Research of Differential-algebraic Attack on AES,TN918.1
  9. The Differential Attack of Serpen,TN918.1
  10. Cryptographic hash functions collision analysis and research,TN918.4
  11. Study on the Structure, Wood Property and Water Transport of Hippohae Rhamnoides,S781
  12. Study of the differential balanced nature of the power function on the finite field and ring multi- valued logic function construction,O174
  13. The Design and Analysis of Nonlinear Combining Sequences,TN918.1
  14. Advanced Encryption Standard differential analysis and integration of research,TP393.08
  15. Research on the Electronic Control of Machine Tool and Basic Experiment of Ultrasonic Grinding Engineering Ceramics,TG663
  16. Al_2O_3 ceramic creep feed grinding technology of ultrasound,TG663
  17. A Study on the Characteristics and Engineering Effects of Abnormal Geothermal in Hemenkou Dam Area of Wudongde Hydroelectric Station on Jinshajiang River,TV221.2
  18. STUDIES ON PHYSICAL AND MECHANICAL PROPERTIES AND PREPARATION OF THE ZIRCONIA-TOUGHENED CERAMICS FOR DENTAL APPLICATION,R783.1
  19. Study on Microstructure and Properties of SiCp/Cu Composites,TB331
  20. Study of Urban Land Granting Fee,F301

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Grinding and grinding machine > General issues > Grinding process
© 2012 www.DissertationTopic.Net  Mobile