Dissertation > Excellent graduate degree dissertation topics show

Of multistage solid solution heat treatment on the microstructure and properties of 7150 aluminum alloy

Author: ChaoHong
Tutor: ChenKangHua
School: Central South University
Course: Materials Science
Keywords: 7150 aluminum alloy Solid solution Recrystallization Mechanical Properties Stress corrosion
CLC: TG156.94
Type: Master's thesis
Year: 2009
Downloads: 106
Quote: 0
Read: Download Dissertation

Abstract


Al-Zn-Mg-Cu - based ultra-high - strength aluminum alloy must have a high density of precipitated phases in order to maintain a high intensity , but at the same time precipitated phase chain enrichment at the grain boundaries , grain boundary cracking significantly , severely restricted the fracture toughness of the alloy and stress corrosion resistance, limiting the potential of the play . Need to seek effective regulation of the grain boundary structure and the precipitation of grain boundary phase method to solve this problem . This paper proposed regulation of step - by - step solution-treated 7150 aluminum alloy grain boundary structure and solid solution - pre-precipitation - regulation of grain boundary precipitates size and distribution of the two methods , solution treatment observed by metallographic and SEM microstructure , mechanical properties test , conductivity measurements , and corrosion ( intergranular corrosion and exfoliation corrosion , stress corrosion ) testing and other means , study reveals a step - by - step solution treatment and solid solution - pre - precipitation - solid solution treatment and regulation of grain boundary structure and grain boundary precipitation phase , to improve the mechanical properties and corrosion resistance role . Step - by - step solution heat treatment effectively suppress recrystallization and crystal grain of the 7150 aluminum alloy to grow, and to reduce the degree of recrystallization of the alloy matrix . Compared with the conventional solid solution gradually solid solution increased the strength and fracture toughness of the of T6 state and T77 alloys , improved intergranular corrosion , exfoliation corrosion and stress corrosion . 7150 aluminum alloy after solution - pre-precipitation - again after solution treatment , a significant number of residues in the grain boundary of second phase particles , to produce induced grain boundary precipitation of the aging process , precipitated phase in the grain of the alloy after T6 aging treatment boundary roughening and discrete distribution . Compared with the conventional solid solution , solid solution - pre-precipitation - solution treatment at the the maintain the T6 state and of T77 alloys hardness and strength at the same time , improve the intergranular corrosion , exfoliation corrosion and stress corrosion .

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Research on Welding Characteristics of CO2 Laser-GMA Hybrid Welding for Ultra-Low Carbon Bainitic Steel,TG456.7
  3. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  4. Study on the Recycling of Post-Consumer Polyester Textiles,X791
  5. Fabricationand Properties of SiC-AlN Multiphase Ceramics Prepared by Gelcasting,TQ174.62
  6. Synthesis of Polysulfones and Modification for Epoxy Adhesives,TQ433.437
  7. Structure and Characterization of Room Temperature Self-crosslinked Acrylonitrile-butadiene-styrene,TQ325.2
  8. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  9. Modification of Talc Powder and Its Reinforcing and Toughening on Recycled Polypropylene,TQ325.14
  10. Failure Analysis on Superheat Section Connecting Pipe Flange of Ethylene Cracking Furnace,TQ221.211
  11. Effect of Adding ZrO 2 Nanopowder on Microstructure and Mechanical Properties of Carbon Steel,TB383.1
  12. Preparation of Surface-functionalized Graphene and Its Influence on the Mechanical Properties of Nanocomposite Materials,TB332
  13. Study on Microstructure and Texture during Hot Rolling and Normalizing of Twin-roll Cast Silicon Steel Strip,TG335.11
  14. Preperation of Low Friction and Wear Resistant High-Purity Alumina Ceramic,TQ174.1
  15. The Study of Forming Process and Properties of PTT/PET Skin-Core Composite Monofilament with Large Diameter,TQ340.64
  16. Research on Structure and Mechanical Property of Hook and Loop Fastener,TE931.2
  17. Processing and Property Study of Mg2TiO4 -based Microwave Dielectric Ceramics,TN04
  18. 316LN austenitic stainless steel stress corrosion cracking of welded joints,TG407
  19. Rolled Mg-Zn-Ce-Zr (Mn) alloy microstructure and mechanical properties of,TG339
  20. Simulated lunar ambient temperature magnesium alloy microstructure and mechanical properties of,TG146.22
  21. Shanghai Comprehensive Test of mechanical properties of clay and constitutive modeling,TU411.3

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Heat treatment > Heat treatment process > Special heat treatment > Solution treatment,precipitation processing
© 2012 www.DissertationTopic.Net  Mobile