Dissertation > Excellent graduate degree dissertation topics show

Innovation Design of Thick Shell Compressor Tear Down Machinery

Author: ZhangXu
Tutor: DuYuMing；ZengGuang
School: Tianjin University
Course: Mechanical Engineering
Keywords: compressor tear down milling modern design programmable logic control
CLC: TG48
Type: Master's thesis
Year: 2010
Downloads: 28
Quote: 0
Read: Download Dissertation

Abstract


This paper is base on the real requirement from manufacturer regarding the thick shell compressor tear down. Firstly we made the advantage and disadvantage study of current cutting process and machinery, for instance the vertical lathe turning, edental saw cutting and rolling press machine. At the end we worked out the more efficient and more reliable cutting machinery base on modern design solution and innovation solution. This new machine is high speed milling machine which dedicated for thick shell compressor tear down.The design and manufacture of this facility was already done, and it already delivered to the enterprise. From general point of view, it is satisfied with the original requirement from enterprise. The efficiency of this facility is higher than vertical lathe, it also has smaller volume and less power consumption. So we can say that this machinery can save the energy and reduce the cost for the enterprise.We also met some unexpected issue during the debugging period. We made the revision and optimization and finally we solved all the problem. For instance we found the vibration and noise due to the milling force during the trial run. Base on the deep analysis, we solve this problem with the solution that put the damping on the compressor supporter.For the high speed milling process which used in this design, it is new in this field all over the world. It has the advantage that high speed, big producing range of thickness and especially for the thick shell producer. It also can be applied in the tube process area if we modified somewhere base on the current design. And it can be designed as standard tube process machinery with more deep study.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. Numerical Study of the Effect with Straight and Bowed Stator in Different Axial Gaps,TH45
  3. Talk about the Folding Furniture and Its Application in Modern Design,TS664.01
  4. PC motion control card Engraving and milling system development based on simulation studies,TG54
  5. Research on CNC Milling System,TG547
  6. The Procedures of Yiyang Bamboo Weaving and Its Transition,J528.5
  7. Research on the Milling Performance and Parameters Optimization with Large Parts of Heavy Machine,TG54
  8. Research on Visual Design System and Simulation of Helicoid Formed Milling Cutter,TG714
  9. The Research of Milling Cutter Parametric Design System Based on UG,TP391.72
  10. Preparation and Properties of ZAO Target,TB383.1
  11. Preparation and Characterization of Rare-earth Luminescent Material CaWO4: Eu3+,TB383.1
  12. Modified Design of Micro-milling Machine Tool and Numerical Control System Development,TG547
  13. Study on PMT Preparation, Structure and Performance of NiCoMnIn Alloy Foam,TG139.6
  14. Preparation of Silicon-based Alloy Anode Material Andelectrochemical Properties,TM912
  15. Preparation and Characterization of Nano-sized TiO2 Powder and Ceramics,TB383.1
  16. Residential Interior Design Reflects the Design of Human,TU238.2
  17. A Study of the Mission Flower and Its Application in Tang Synasty,J522
  18. Phoenix Bird Chinese Traditional Decorative Patterns and Its Application in Modern Design,J524
  19. The Applied Research of the Chinese Traditional Culture Symbols in Modern Design,J524
  20. Influence of High Magnetic Field & Surface Nanocrystalline Treatment on Carburizing of Pure Iron,TG156.81
  21. Study on Influencing Factors of Thin-walled Workpiece’s Surface Quality during Peripheral Milling,TG54

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Metal cutting and equipment
© 2012 www.DissertationTopic.Net  Mobile