Dissertation > Excellent graduate degree dissertation topics show

Technology Study and Accuracy Analysis of Optical Microstructures Manufactured by Fast Tool Servo

Author: ZhuDengChao
Tutor: WangGuiLin
School: National University of Defense Science and Technology
Course: Mechanical Engineering
Keywords: Microstructure Micro-lens array Fast Tool Servo(FTS) Tool Interference Tool compensation
CLC: TG51
Type: Master's thesis
Year: 2010
Downloads: 49
Quote: 2
Read: Download Dissertation

Abstract


Optical components with complex surfaces or microstructures are more and more widely used in martial and civil fields. For example, micro-lens array in infrared detector and freeform prism in military headpiece can greatly improve integrative performances of optical system. Complex surfaces or microstructures can be manufactured by using ultraprecision fast tool servo (FTS) system with high dimension accuracy, high figure accurary and low surface roughness. Whereas machining accuracy of microstructure is influenced by many factors, the relationships among these factors are very complex, and little research reports are found.In the dissertation, accuracy analysis and design of optical microstructures are studied on the basis of machining characteristics of ultraprecision FTS system. The main contents are expressed as follow:1) Base on the structure constitution, dynamic characteristics and cutting parameters of FTS system, the processing model between control signals and tool displacement is built, and the forming model of complex surfaces or microstructures is built and analyzed. Furthermore, these influencing factors on machining accuracy of microstructure are studied.2) According to the machining characteristics of typical microstructures by FTS system, the inflence of tool interference on machining accuracy is studied, and the design principle of tool parameters is presented.3) The over-cut of microstructures is studied in the process of FTS machining. In order to improve machining accuracy, the algorithm design of tool compensation is achieved in the machining process of micro-lens array. Besides, the processing software is programmed.4) Two kinds of micro-lens array which have different arranging form are machined by using ultraprecision FTS system. Furthermore, the machined surfaces are tested and analyzed, and the results indicate that machining accuracy of micro-lens array is obviously improved, which can satisfy the application requirements.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  3. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  6. Preliminary Study on Salt-Tolerant Mechanism of the New Pennisetum Purpereum Schumach Variety-Sumu No.2,S543.9
  7. Study on the Fine Structure of Intestine and Intestinal Mucosal Barrier in Zebrfish (Brachydanio Rerio),Q95-33
  8. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2
  9. Study on the Mechanism of Heat-Induced Gelation of Myofibrillar Proteins,TS251.1
  10. Studies on the Aggregation and Microstructure of Imidazolium Ionic Liquids in Solutions,O645.1
  11. Studies of Luminescence Characteristics of Eu3+-doped Rare Earth Borates REBaB9O16 （RE=rare Earth Ions and Y）,O627.3
  12. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  13. Study on Stock Price Behavior Around Periodical Reports Based on Asymmetric Information,F832.51
  14. Research on Processings and Microstructure and Properties of HRB400MPa,TG335
  15. Study of Performance of Cordierite Combined Mullite Products,TQ175.71
  16. Effect of Adding ZrO 2 Nanopowder on Microstructure and Mechanical Properties of Carbon Steel,TB383.1
  17. The Broussonetia papyrifera fiber structure and properties of microwave - assisted the degumming process parameters optimization,TS123
  18. Studies on the Influence of Rare Earth Ce on Microstructure and Properties of Huge Heat Input SAW Seam Metal,TG445
  19. Hexagonal boron nitride micro- structure and adsorption properties of,TB383.3
  20. Rolled Mg-Zn-Ce-Zr (Mn) alloy microstructure and mechanical properties of,TG339
  21. Simulated lunar ambient temperature magnesium alloy microstructure and mechanical properties of,TG146.22

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Turning and lathe ( lathe )
© 2012 www.DissertationTopic.Net  Mobile