Dissertation > Excellent graduate degree dissertation topics show

The Mechanical Property and Parameter Optimization for Cutting Mechanism of Vertical Axis Hard Rock Roadheader

Author: WangDan
Tutor: LiXiaoHuo
School: Liaoning Technical University
Course: Mechanical Design and Theory
Keywords: hard rock roadheader cutting mechanism load MATLAB strength ANSYS vibration modal ADAMS CSPSO optimization
CLC: TD421.5
Type: Master's thesis
Year: 2009
Downloads: 254
Quote: 1
Read: Download Dissertation

Abstract


The working condition of hard rock roadheader is poor. Cutting head is the important parts of the roadheader, its performance affects the structural strength and service life of the roadheader directly. Mathematical model of cutting head is established based on the empirical formula for the load of single pick. Load changing pattern features of pick and cutting head are simulated when the cutting head face different rigidity rock, then FEM modal analysis is used on the key cutting parts and components to check the strength requirements.After this, the vibration math model is built by Lagrange formulation, simplified model of the cutting head is built, modal analysis and vibration curve are done by it. Finally, the optimization model is established, which take the hard rock roadheader’s problems into consideration, and takes cutting dust quantity、specific density consumption、load fluctuation、quantity of pick consumption and production efficiency of roadheader as subject target function, and then regards structural parameters and moving parameters of cutting head which have a strong influence on four target functions described above as design variable, and fixes on constrained condition according to working conditions and practical experience of cutting mechanism, and uses chaos-particle swarm to optimize parameters of cutting head to get the best paraments of hard rock roadhead’s cutting head.

Related Dissertations

  1. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  2. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  3. Study on Springback of High-Strength Steel Stamping,TG386
  4. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  5. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  6. The Design & Research of Automatic Transmission Load Simulator,TH132.46
  7. Global Stability of Telescopic Boom with Impact of Lap between Booms and Friction,TH211.6
  8. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  9. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  10. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  11. The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
  12. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  13. Research on Parallel Frequent Graph Pattern Mining,TP311.13
  14. The Development of Soft System for Power Load Management Terminal Testing Device,TP311.52
  15. Application Research of Digital Image Processing on Container Inspection,TP274.4
  16. Experimental Study of Porous Composite Materials on the Base of Recycled Concrete Powder-Cement,TU528
  17. The Study of Preparation and Photocatalytic Activity of TiO2 by Electrospinning,O614.411
  18. The Experimental Research on Regeneration Aggregate and Proportioning of Recycled Concrete Brick,TU528
  19. Research on Vocabulary Acquisition through Reading in the Perspective of Incidental Vocabulary Learning,G633.41
  20. The Research on the Formation and Application of Carbonaceous Mesophase,TQ127.1
  21. Recycled aggregate semi- rigid concrete preparation and molding of test,TU528

CLC: > Industrial Technology > Mining Engineering > Mining machinery > Mining machinery > Underground mining machinery > Boring machine
© 2012 www.DissertationTopic.Net  Mobile