Dissertation > Excellent graduate degree dissertation topics show

Study on Component Warp with Thin-wall Plastic Injection Moulding

Author: TangZuo
Tutor: RuanFeng
School: South China University of Technology
Course: Mechanical Manufacturing and Automation
Keywords: thin-wall plastic injection warpage CAE orthogonal experiment IMD
CLC: TQ320.662
Type: Master's thesis
Year: 2010
Downloads: 302
Quote: 4
Read: Download Dissertation

Abstract


Thin-wall plastic products play an important role in automobile plastic products and IMD plastic products. And warpage, which is a common problem in plastic injection, shows unique characters in thin-wall plastic injection. Adjusting technical setting on the base of traditional experience and technical skill is considered to be inefficient and hard tor estimate the product development cycle. However, it is efficient solution for decreasing warpage by optimizing plastic injection setting supported by both CAE and orthogonal experiment theory.Mechanics, factors and control solution of warpage within thin-wall plastic injection products, including new requirement of injection plastic, mould design, injection unit etc. The impact of multiple plastic injection parameters on warpage of plastic injection products are comprehensively evalued. Taking windows packer as research object, construct its simulation model, arrange the simulation according to orthogonal experiment theory, analysis the simulation result, and figure out the best injection parameter combination and the impact of parameter on warpage of plastic products. It comes out that injection time is the most significant factor. Judged from real experiment in the factory, better product with less warpage can be produced by using the best injection parameter combination.Warpage of IMD thin-wall plastic injection product is studied with the same method. Taking a laptop cover as research object, arrange the plastic injection experiments according to orthogonal experiment theory, analysis the results, and figure out the best injection parameter combination and the impact of parameters on warpage of IMD thin-wall plastic products. It comes out that PET thickness is the most significant factor. And warpage of the laptop is effectively reduced.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. The Design and Experimental Rearch of Disposable Catalyzer in the Process of Coal Liquefaction,TQ529.1
  3. Study on the Extracting Technology of Polygonatum Polysaccharides and Preparation of the Polygonatum Sibiricum Yoghurt,TQ461
  4. A New Method of Separating HDPE and PP with an Improved Barrier Screw,TQ320.52
  5. Research on Experiment of the Effect of Dynamic Pressure on the Hydraulic Properties of Drip Emitters,S277.95
  6. Study on the Asymmetric Bioredution of 3-Chloropropiophenone with Highly Active Bread Yeast Cells and Its Optimum Biotransformation Condition,R914
  7. Research in Separation Technology of Cashew,TS255.6
  8. Study on Twin-Screw Wet Spining Process of Alkali-Solubil Hydroxyethyl Cellulose,TQ340.6
  9. Chemical Constituents of Whitmania Pigra and Extraction Process of Shenyuan Tablet,R284.1
  10. The lightweight composite member bodywork portable processing equipment developed,U468.2
  11. IMD Process Transfer Project Management,F283
  12. Treatment of DDNP Wastewater with Coagulation-fenton Process Andwhite Rot Fungi,X703.1
  13. Preparation of Hollow Fe3O4 Drug-loaded Magnetic Nanoparticles and Drug Releasing Properties Investigation in Vitro,R944
  14. Treatment of Hexavalent Chromium in Groundwater Using Zero-Valent Iron Nanoparticles,X523
  15. To Explore the Distinct Membrane Reforming Activities Induced by the Domains of Abba1 in COS7 Cells,R329
  16. Inter -nitrotoluene vapor phase catalytic hydrogenation synthesis toluidine Process,TQ246.31
  17. Reaserch on Stamping of High Strength Steel Sheet Car B-Pillar Stiffer,TG386.2
  18. Experimental Study of Control Microorganism on Recalimde Water for Circulating Cooling Water of Power Plant,X703
  19. Screening and Breeding of Streptomyces YM and Optimizing of Fermentation Conditions,TQ465.2
  20. Establishment a Multiplex PCR Method for Detection of Four Foodborne Pathogens,R155.3

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > General issues > Production process and production technology > Forming > Injection molding
© 2012 www.DissertationTopic.Net  Mobile