Dissertation > Excellent graduate degree dissertation topics show

Development of Combustion Analyzer and Multi-pulse Injection System Used on Total Cylinder Dumpling Apparatus

Author: ZhangBin
Tutor: SongChongLin
School: Tianjin University
Course: Power Machinery and Engineering
Keywords: Diesel engine Total cylinder dumping system Combustion analysis Multi-pulse injection
CLC: TK421
Type: Master's thesis
Year: 2007
Downloads: 45
Quote: 0
Read: Download Dissertation

Abstract


At present,the pollution of particulate emissions from diesel engine is attracting more and more attentions in the world, therefore it is necessary to shed light on the formation mechanism of the modern diesel particulates. The author developed a combustion analyzer and multi-pulse injection system used in the total cylinder dumpling system, which is one of important technique to study the formation mechanism and evolution process of diesel particulates, and the main contents of the dissertation are as follows:1) Aimed at total cylinder dumpling system, a combustion analyzer system was developed based on LabVIEW. Besides friendly human-machine interface, the system could observe the cylinder pressure and compute the rate of pressure rise, rate of heat release and mean cylinder temperature on line.2) A multi-pulse injection system was carried out on a common rail system. By means of the PC resources of hardware and software, interruption technology was used as the kernel of the electronic control unit (ECU).The timing card 8253 and Generic Array Logic (GAL) were programmed under DOS to realize the ideal drive of the injector. The system could reach to 5 pulses and the pulse width, dwell time, number of multi-pulse injection and pulse timing could be adjusted individually and flexibly in real time3) Multi-pulse injection system and combustion analyzer were verified in the total cylinder dumpling apparatus. The results show that the injection pressure of the multi-pulse injection system could attain to 110MPa, the pilot injection timing could be adjusted flexibly and the pilot injection duration could keep in 0-160us, which made it feasible to simulate the multiple injections in common rail diesel. On the other hand, the combustion analyzer had the capabilities to actualize the capture of cylinder pressure per 0.5oCA, process the obtained data in real time, show the in-cylinder combustion parameters and determine the sampling crank angle, which meet the requirements of relevant study.

Related Dissertations

  1. High Pressure Common Rail Diesel Engine Fueled with Biodiesel test under different atmospheric pressure,TE667
  2. Applied Research of Emulsified Fuel on S195 Diesel Engine,TE626.24
  3. A New 185K Single-cylinder Diesel Engine Supercharged System Development,TK423
  4. Improve the Mechanics Performance of the High Strength Grey Cast Iron,TG251
  5. Get off the plateau environment with diesel engine fueled with biodiesel,TE667
  6. High - pressure common rail diesel engine management system, transmission coordination strategy,TK423
  7. Experimental study of oxygen-enriched air intake combined with EGR technology for turbocharged diesel engine emissions,TK421.5
  8. Based on multi-body dynamics of the diesel engine body structure strength analysis,TK421
  9. Stability test and the engine performance of the mixed fuel of ethanol, diesel and BED,TK428.9
  10. Flow simulation based on network analysis of diesel engine lubrication system,TK423
  11. High Pressure Common Rail Diesel Engine Calibration of the system communication module based driver development,TK423
  12. Parametric design of the diesel engine inlet passage,TK422
  13. 4100QB-2 diesel engine fueled with bio - diesel tank Working Process Simulation and Experimental Study,TK427
  14. Causes and Measures of Engine Block Leakage,TK428
  15. CFD Simulation Analysis of Diesel Locomotive Intercooler Performance,TK423
  16. CFD Analysis of Water Jacket Flow Field in Multi-cylinder Diesel,TK421
  17. Numerical Simulation on Effects of Injector Nozzle-Hole Layout on Combustion and Emissions in a DI Diesel Engine,TK421.5
  18. Numerical Study on the Mechanism of Fuel Injection Strategy Coupled with EGR for Diesel Engine,TK421
  19. The Development of A Hd Diesel Engine Combustion System Based on EGR,TK423
  20. Design of Electronic Control Unit for Electric Supercharger,TK423
  21. Investigations on Performance of a CR Diesel Engine Operating on DECC,TK401

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > Diesel engine > Theory
© 2012 www.DissertationTopic.Net  Mobile