Dissertation > Excellent graduate degree dissertation topics show

Elevator Landing Door Parametric Design and System Development

Author: WeiWei
Tutor: ZhangShiChang
School: Tianjin University
Course: Mechanical and Electronic Engineering
Keywords: Elevator landing door Parametric Design Family Table Finite Element Analysis Document Information Management
CLC: TU976.3
Type: Master's thesis
Year: 2007
Downloads: 124
Quote: 0
Read: Download Dissertation

Abstract


An important part of the product as an elevator , the elevator landing door due to the higher requirements of safety, operational quality and operating life , the difficulty of design work , usually longer development cycle . Because of the diversity of market demand and market competition is becoming increasingly fierce , put forward higher requirements on the quality of product development and the development cycle . The same time , in order to control costs , the design of the landing door should also meet the requirements of mass production and modern manufacturing . These are Tingmen system design of the current shortage and the need to improve the place . According to the market demand and the Group 's strategic planning and Austria , and the combination of the OTIS mainstream door machine system and the original design basis , design and develop new Tingmen system . The main tasks are as follows : 1 . Use Pro / E software Tingmen parametric design , the landing door parts standardization, serialization , and modular , and seeks to cover a variety of non-standard designs . Parametric design program driven mainly design methods supplemented by family table . 2 analysis using finite element analysis software means to check and optimize product designs . 3. Taking into account in the design of the actual manufacturing capacity in product design and manufacturing process design , fully embodies the design concept for the production . With the construction of enterprise information in the design process , the establishment and improvement of the document information management system . Currently , the prototype test phase of the product in small quantities , through a variety of system testing , the run indicators assessment and practice of the production process , to show that the design new Tingmen system to achieve the desired objectives , provides a good example for the development of new products .

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Design of Testing Equipment for Electronic Products,TN06
  6. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  7. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  8. Sham hose drum drive means and hydraulic system of the structure,TE973
  9. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  10. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  11. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  12. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  13. Parametric Design of Flow Channels and Analysis of the Flow Field,TP391.72
  14. Simulation of the Clinching Process Using FEA Method with Steel and Aluminum Alloy Sheets for Automotive Sunroof Frame,U463.83
  15. Flange Parametric Design System Based on Pro/E,TP391.72
  16. M1 of CRH2-300 Train Finite Element Analysis and Travelling Comfort,U266
  17. The Design of Telescopic Asphalt Spraying System,U415.524
  18. Development of Post-process System in Sheet Metal Simulation Based on SolidWorks,TP391.72
  19. Failure Analysis and Structural Optimization of the Typical Fine Blanking Punch,TG385.2
  20. The Structure Design of 2000kN Servo Press for Hot Forming,TG385
  21. Al Wire Bonding Failure and Automatic Optical Inspection on Power Device Leadframe,TG441

CLC: > Industrial Technology > Building Science > High-rise buildings > High-rise building equipment > Vertical and horizontal transportation systems
© 2012 www.DissertationTopic.Net  Mobile