Dissertation > Excellent graduate degree dissertation topics show

Precision digital electronic Rally System Design and Implementation

Author: YeZuoJuan
Tutor: LiaoJianMing
School: University of Electronic Science and Technology
Course: Software Engineering
Keywords: MSP430F427 AD Convert Digimatic Pipes and Filters pattern
CLC: TH823
Type: Master's thesis
Year: 2008
Downloads: 132
Quote: 1
Read: Download Dissertation

Abstract


The force gauge is a portable、multi-function、high-precision gauge instrument for measurement of the both compressive and tensile forces。At present, Japanese product is the best one in the domestic market of force gauge and the American product is the second. But the performace of Chinese product in this area is not as good as foreign products. Most people rely on the imports of the force gauge to meet their needs, which are very expensive. So we need our own products. The purpose of the project is to develop the force gauge system which is composed of a force gauge and a data processing system.The paper analyzes the working principle of the force gauge, takes the accuracy into consideration and designs the circuit of the force gauge with MSP430F427 as the core. In the circuit, the sensor collects the signal and uses the amplifier to amplify it. Then the AD Converter in MSP430F427 converts the analog signal to digital signal. At last, the result is transmitted to the LCD to display. In addition, the paper introduces the principle and the application of the 3-points calibration which is used to calibrate the force gauge when produced.Secondly, the paper introduces the pins, communication protocol and the clock of the Digimatic interface and designs a program to print data on the MSP2.It is necessary to make a simple and effective communication protocol to confirm the communication between the force gauge and computer. The protocol defines the data frame and response protocol. In the end, the paper introduces the design and implement of the data processing system which is consisted of logon, serial port communication, data processing, calibration modules. Of the four modules, data processing is the core module, which is a typical unit to process the data flow.So we choose the Pipes and Filters pattern to design the module. In the end, we test the force gauge system which is used as product, and make an evaluation of the system based on the test results and the suggestion from users.

Related Dissertations

  1. Design of Access System for Wireless Meteorological Facsimile Image,TN917.8
  2. With wireless transmission function digital torque measurement systems research and development,TH823
  3. Finite Element Analysis of Clamp and Design of the Force Testing Equipment,TH823
  4. Dynamic Strain Measurement Instrument Based on Virtual Instrument Technology,TH823.3
  5. Study on the Tension System of Wire Ropes Based on PXI-Bus,TH823
  6. Development of Stiffness Surveying Instrument for Precise Elastic Elements in Electro-Hydraulic Servo Valve Based on Charge-Coupled Device,TH823
  7. Research on the Device for Measuring Microtensile of Ultra-Thin Fibers,TH823
  8. Based on cross-correlation time delay estimation L_ (CR) waves tangential stress detection system,TH823.2
  9. Research on Manner and Device of Loading Weights Respectively and Continuously of the Primary Force Standard Machine,TH823
  10. Piezoelectric six-dimensional force value dynamometer key technology research,TH823
  11. Development of Piezoelectric Dynamometer Applying in Small-Deep-Holes,TH823
  12. Study of High Accuracy Torque Measurement for High-speed System,TH823.4
  13. Applied Research on Testing Technology of Torque Coefficient of Threaded Fastener Bolting,TH823
  14. Based on the special structure of the new dial indicator gage dynamometer developed standards,TH823
  15. The Exploration Research to Ultramicro-Force Measurement Using Electrostatic Field,TH823
  16. The Design of the System for Prestressed Tention Device Based on S3C44B0X Microcomputer,TH823.1
  17. Research on the Reliability Tests in 1MN Deadweight Force Standard Machine,TH823
  18. The Research and Design on a Torque-Loading Device with Flexure Hinges,TH823
  19. Research on the Rolling Friction Cylinder Hydraulic Standard Force Source Technique,TH823
  20. Design and Research of Telemetry Torquemeter Based on Bluetooth Technology,TH823
  21. A New Kind of Device of Residual Stress Testing Sensor Based on Magnetic Effective,TH823

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > Mechanical quantity measuring instruments > Force measuring instruments
© 2012 www.DissertationTopic.Net  Mobile