Dissertation > Excellent graduate degree dissertation topics show

Investigation on Intelligent Recognition Method Based on Feature Extraction of Hilbert Spectrum and Application

Author: SunZhiHui
Tutor: LiHongKun
School: Dalian University of Technology
Course: Mechanical and Electronic Engineering
Keywords: Hilbert Transform SVM Energy Barycenter Fault Diagnosis
CLC: TH17
Type: Master's thesis
Year: 2009
Downloads: 189
Quote: 1
Read: Download Dissertation

Abstract


Machinery fault diagnosis is a comprehensive technology. As a matter of fact it is pattern recognition of machine operating conditions. The key is feature extraction which is also the most difficult thing. In some way the success of the fault diagnosis is up to the feature extraction. So it is particular interest to the machinery diagnosis.Based on the actual engineering, the application of Localwave in the feature extraction for non-stationary signal is researched in this dissertation. Compared with other methods, Localwave method has many advantages. But analysis results may be influenced because of mess of time-frequency spectrum. And 3-D diagram of time-frequency spectrum can be affected easily by the observation angle of view. Other more, the identification of the time-frequency spectrum mainly depends on the expert experiences, which limits engineering application of Localwave.To counter these cases, Hilbert time-frequency spectrum(HS) energy barycenter method is discussed to extract the feature for signal in this dissertation. This method is expected to realize quantitative analysis for the time-frequency spectrum. Experiments are carried out to prove the method. And they are done in the different frequencies which are 10Hz, 15Hz, 20Hz and 25Hz. Firstly, datum of bearing are gathered and analyzed when the bearing works under normal condition, inner ring condition and outer ring condition. Secondly, the energy barycenter of HS is calculated. At last energy barycenters are classified and identified by support vector machine. Results of the experiments show that ratio of right classification is high. So it is clear that the method to extract feature by HS energy barycenter is reasonable. Meanwhile, in order to do comparison, time domain index is extracted to do the test, and the result can also prove reliability of this method.Base on HS spectrum energy barycenter method, a fault diagnosis system is developed using LabVIEW. It proves a new method for intelligent fault diagnosis of machinery.

Related Dissertations

  1. Design and Development of Application Programme for Fault Analyzer Based on Wince Platform,TP311.52
  2. Soft Sensor of Naphtha Dry Point on Support Vector Machines Regression,TE622.1
  3. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  4. The Research of the Fault Diagnoses Algorithm for the Liquid Rocket Engine Testing Bed Based on PCA-SVM,V433.9
  5. ISAR Imaging Simulation of Space Targets and Target Recognition Based on ISAR Images,TN957.52
  6. Research on Autamatic Music Structrue Analysis,TN912.3
  7. Research on Feature Extraction and Classification of Pulse Waveform for Cholecystitis and Nephrotic Syndrome Diagnosis,TP391.41
  8. The Research on Paper Currency Classification Method Based on Harr-Like Feature and Minimal Ball Including Samples,TP391.41
  9. Fault Diagnosis Method Based on Support Vector Machine,TP18
  10. Fault Diagnosis Research on Three-Tank System,TP277
  11. Research on the Key Technology of Waterborne Transport Security System,U698
  12. Research on Predicting Intrinsic Disorder Protein Structure Based on Supervision Manifold Learning Algorithm,Q51
  13. Study on the Road Condition Monitoring Based on Vehicular 3D Acceleration Sensor,TP274
  14. Fault Diagnosis Method Study of Hydraulic System of Concrete Pump,TU646
  15. Stage Fault Diagnosis Based on Data Fusion,TP18
  16. GPRS-based transformer fault diagnosis system,TM407
  17. Study on Automatic Classification Method for Remotely Sensed Imagery by Incorporating Spatial-Spectral Features,TP751
  18. Design and Implementation of the Process Monitoring and Fault Diagnosis for Injection Molding,TQ320.5
  19. WEB-based remote monitoring system for electrical and mechanical equipment applied research,TP311.52
  20. Multi-channel Real-time Online Monitoring System for Polymerizers,TP274
  21. The Research and Application of the State Evaluation Method of Power Generation Equipment,TM621.3

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical operation and maintenance
© 2012 www.DissertationTopic.Net  Mobile