Dissertation > Excellent graduate degree dissertation topics show

The Simulation of Single-phase Earthed Fault in Small Current System and Multi-information Line Selection Study

Author: PengBin
Tutor: WangShiSheng
School: Nanchang University
Course: Control Theory and Control Engineering
Keywords: small current system fault line selection MATLAB BP neural network multi-information line selection
CLC: TM862
Type: Master's thesis
Year: 2010
Downloads: 106
Quote: 0
Read: Download Dissertation

Abstract


The single-phase ground fault accounted for 80% of all distribution networks’ fault. How to accurately, rapidly diagnosis fault lines is a practical issues and also a problem in the face of electrical engineers to be resolve promptly. The current of small-current system is so little that could be easily affected by the environment changes and the influence parameters of itself. Nowadays, a lot of researchers put forward many principles to solve this problem while any method has its limitation. In recent years, with the development of computer and electronic technology, the transient fault signal can be quickly acquired which makes accurate line selection possible. The single method of line selection cannot satisfy the needs of fault line selection. With the development and application of intelligent control theory, the comprehensive analysis of the fault information greatly improves the accuracy of line diagnosis which was called multi-information line selection.Firstly, this paper gives briefly conception of small-current system and emphatically analyzes three different operation of single-phase earthed process, including current and voltage changes. Both transient and steady information of earthed fault are analysis. Then the method of line selection is introduced. In order to further understanding of earthed fault, the simulation model of small current system was built based on MATLAB. A lot of simulation was found according to the actual failure. By analysis and comparison of the figure, the influence factors of fault information are appearing. The results of simulation and comprehensive of fault signal contribute to the multi-information research. Otherwise based on MATLAB platform it develops the GUI interfaces which can automatic built simulation model.Another difficulty of fault line selection lies in the fault information’s extraction and comprehensive judgment. In this paper, the fifth harmonic of zero-sequence current, line’s power and energy of the zero-sequence current are used as the fault feature. Based on the three characteristics and BP neural network, the multi-information line selection was operation. From test, the BP neural network has very good learning ability and the sinulination result is satisfied. The multi-information line selection method is much batter than the single line selection methods.

Related Dissertations

  1. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  2. Research on Feature Extraction and Classification of Tongue Shape and Tooth-Marked Tongue in TCM Tongue Diagnosis,TP391.41
  3. Research on Visual Servo System of Mechanical ARM,TP242.6
  4. Application Research of Digital Image Processing on Container Inspection,TP274.4
  5. Municipal tourism land use planning environmental impact assessment,X820.3
  6. Study on Taste Characteristic of Taste Peptide Enzymatic Production from Oyster Base on A Neural Network Method,TS254.4
  7. S-lay Installation Analysis for Deepwater Pipeline,TE973
  8. The Research on Evaluation of Living Status Systems of Expressway Relocated People,D523
  9. The Research and Application of Software Reliability Test for User Right Management System,TP311.53
  10. Research and Application of Safety Assessment Method Based on Neural Network,X937
  11. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  12. Research on Analytical Method to Calculate the over Voltage and Surge Impedance of Tower under Lightning,TM863
  13. Mine Risk Information Integration and Intelligent Early Warning,X936
  14. Mining resources based on genetic algorithm optimization model of,O224
  15. SAR interferometric method for optimal selection,P225.2
  16. Optimization Study on Gating System and Molding Process Parameters of Injection Mold Based on Simulation,TQ320.662
  17. Research of Adaptive Active Noise Control Based on Neural Network,TP183
  18. Research on Automatic Reading System for Digital Meters,TP391.41
  19. Research on Feature Extraction, Selection and Classification Algorithms for Pulmonary CAD,TP391.41
  20. The Research of Evaluation Method in Connect6 Based on BP-TD Learning,TP18
  21. Research on State Diagnosis on Fan Based on Factor Analysis and BP Neural Network,F426.61

CLC: > Industrial Technology > Electrotechnical > High Voltage Engineering > Overvoltage and Its Protection > Over-voltage protection devices
© 2012 www.DissertationTopic.Net  Mobile