Dissertation > Excellent graduate degree dissertation topics show

Experiment and Finite Element Analysis on Vibration of a Diesel Generator

Author: YeYanQin
Tutor: HuangJuHua
School: Nanchang University
Course: Mechanical and Electronic Engineering
Keywords: generator set vibration FEM system of isolation vibration
CLC: TM314
Type: Master's thesis
Year: 2010
Downloads: 80
Quote: 0
Read: Download Dissertation

Abstract


Diesel generators have been widely used in telecommunications, finance, hospitals, markets and industrial and mining enterprises as emergency standby power, and applied to military and fieldwork, vehicles and vessels as independent power for special purposes. Diesel generator provide people with convenience, but also disturb people live and work because of the vibration. In military mobile power, Solving diesel generator vibration problem is urgentThe vibration isolators of a diesel generator produced by an enterprise was selected in accordance with the traditional experience; Vibration intensity was tested and evaluated in the paper for the 120kw and 75kw diesel generators. The result indicates vibration-level drop of each isolation pad is more than 10dB.Because of the electrical components malfunction of 120kw diesel generator, Finite element modeling was built for the 120kw diesel generator with ANSYS in the paper. Numerical calculation of vibration displacement reflects the real structure vibration characteristics. The calculation results showed the vibration displacement may be excessive in particular frequency. Results obtained from harmonic response analysis showed the lager vibration displacement may occur mainly in the initiating or stopping stage.Four optimization scheme including adding two vibration isolators, increasing the stiffness of the vibration isolators, increasing the diameter of the four vibration isolators under the control cabinet and increasing the mass of the control cabinet was presented in this paper. The calculation results showed the vibration displacement, velocity and acceleration of the control cabinet should reduce.

Related Dissertations

  1. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  2. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  3. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  4. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  5. The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
  6. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  7. Marine Boiler Superheater Tubes Expansion Port Stress and Strain Analysis,TQ051.5
  8. Research on Structural Vibration of Steam Piping System,TK284.1
  9. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  10. Steering Mechanism and Hydraulic System for the Electronic Control Hydraulic Power Steering System of Tractor,S219.02
  11. Study on Reducing the Mower Vibration by Optimizing the Crank-rod Mechanism of 170F Engine,S817.111
  12. TWIN BLOCK appliance reconstruction when combined in different stomatognathic muscles and ligaments associated constraint force of impact,R783.5
  13. Undersea robot plow trenching machine design and analysis,TE952
  14. Closed thin-walled beams composite modal damping prediction,TB33
  15. Axial fan blade vibration non-contact measurement,TD441.2
  16. Study on Shear Bearing Capacity of HRBF500-Reinforced Concrete Beams,TU375.1
  17. Research on the Prediction of Underwater Acoustic for a Survey Ship and Reduction for Its Noise and Vibration,TB53
  18. The Surrounding Rock Monitoring and Finite Element Simulation of Subway Tunnel,U455.43
  19. Experimental Research on Automobile Engine Inertia Parameters Identification,U467.2
  20. Analysis and application of large structure vibration test based on wireless sensor networks,TP274
  21. Vibrating force field mixed mechanism of plastic extrusion process,TQ320.66

CLC: > Industrial Technology > Electrotechnical > Motor > Generators, large the generator group ( Zonglun,) > Power Generator
© 2012 www.DissertationTopic.Net  Mobile