Dissertation > Excellent graduate degree dissertation topics show

Structural Strength and Vibration Analysis of the Turbo-generator Stator

Author: LiKun
Tutor: ZhongZuo;TongShuiGuang
School: Zhejiang University
Course: Thermal Power Engineering
Keywords: Stator FEA(Finite Element Analysis) Strength analysis Modal testing Model updating Optimization design
CLC: TM311
Type: Master's thesis
Year: 2010
Downloads: 48
Quote: 0
Read: Download Dissertation

Abstract


Electricity is an important foundation for people’s lives and new industrial development in modern society. Turbo-generator which mainly composed of stator and rotor is one of the most important power generation equipment. Turbo-generator stator mainly includes stator shell, stator core and stator windings. Turbo-generator stator structural strength and vibration have important impact factors on the normal operation of the unit. Traditionally, design of the stator structure are according to experience, this exists blindness in design, design cycle is long, the higher cost and so on. To meet the increasingly rich, personalized market needs, companies urgently need the scientific method to improve the design. This paper combined CAD/CAE technology with experimental method to solve these problems.Structural strength is key performance indicators of the shell of the turbo-generator. To discus the problems of the structural strength in this paper, we used finite element plate element theory to create the stator structure of the whole finite element model, finish the analysis of the strength of she shell, verify the strength to meet the requirements standard.Turbo-generator stator structure vibration is the main problem to the safe operation of the unit. In this paper, we used finite element method to calculate the stator shell and the overall of the vibration modes, and secondly, binding force and vibration testing aspects of theoretical knowledge, for the turbo-generator stator structure vibration problems, through field trials to test the stator structural vibration modes, thirdly, compare the finite element calculation results with test results, analysis error causes. Finally, based on the sensitivity method, through modal amendments. we got a more accurate finite element model that reflects the true stator, providing a reference for the stator structure computer-aided design.Under the reasonable design, manufacture and safety premise, we introduce the genetic algorithm (GA) to optimize the structure of the shell to improve the stress distribution, this saved 12.2% of the material.With the prototype through the trial, compared the results of the analysis with the prototype test results, optimized turbo-generator prototype of the parameters meet the design standards.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  3. The Dynamic Performance Analysis of Oil Pumping Center and Structural Optimization of Improvement,TE933.1
  4. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  5. Medical Application of a Wireless Communication Platform Based on RFID and GPRS,R319
  6. Design and Simulation of Hot Precision Forging Die for Spur Bevel Gear,TH132.41
  7. The turbofan engine pneumatic runner Optimization Approach,V235.13
  8. The Optimization Design and Discusses of Weft Flexible Complex Stab-Resistant Layers,TS186.2
  9. Vane air compressor performance analysis of key components and research,TH455
  10. Phase permanent magnet synchronous motor servo control system design and simulation,TM341
  11. Assignment outside the stator face floating high cycloid hydraulic motor development,TH137.51
  12. Crossover model based on improved cross- modal Damage Identification Method,TU312.3
  13. Induction Motor Direct Torque Control System Design and Research,TM343
  14. Structure Analysis and Optimization of a Reducer,TH132.46
  15. Study on Strength Analysis and Optimization of Minivan-Body Structure Shanghai Jiao Tong University,U463.82
  16. Concrete Tied Arch nonlinear mixed- discrete variables optimization design,U448.225
  17. The Structure Strength Analysis and Optimization Design of Impact Wheel for Impact Roller,U415.521
  18. Model Test on Vehicle-Bridge Couped Vibration for the Long-span Bridge with High-pier,U441.3
  19. Research and Design on Jacking System of the Jack-up Platform,P752
  20. Structural Dynamic Model Updating and Damage Identification Based on the Improved PSO Algorithm,O346.5
  21. Study on Designing Agricultural Product Supply Chain Network,F323.7

CLC: > Industrial Technology > Electrotechnical > Motor > Generators, large the generator group ( Zonglun,) > Turbine Generator
© 2012 www.DissertationTopic.Net  Mobile