Dissertation > Excellent graduate degree dissertation topics show

Preliminary Research on Detecting Cerebral Haematoma Based on Dielectric Property

Author: WangXiangZuo
Tutor: WangChao
School: Tianjin University
Course: Detection Technology and Automation
Keywords: The permittivity of the organism bioelectrical capacitance measuring technology ANSYS simulation haematoma of brain anminal experiment
CLC: TP274.5
Type: Master's thesis
Year: 2007
Downloads: 18
Quote: 0
Read: Download Dissertation

Abstract


The brain haematoma is the pathological reaction caused by some disease of brain tissue and traumatic brain injury, which often aggravates the disease and even leads to death. The brain is the most complex and important organ for the people. The brain tissue has greatly complex performance due to the different diseases, and the electrical characters of the pathological tissue contain abundant structure information and functional information. It is a key for emergency treatment to extract this information and detect the haematoma as well as development timely.Due to the advantage of non-invasive, low-cost and safety, the electrical method is a reliable technique which can be used in the continuous detection on brain haematoma. Based on the dielectric property of the brain tissue, the preliminary research on detecting cerebral haematoma has been studied. The contributions of this dissertation are as follows:1. A measuring method based on dielectric property for brain haematoma detection is presented through analyzing the changing regularity of the conductivity and permittivity of the head tissue at different frequency.2. According to the head structure, a mutli-layer brain model is built up with ANSYS analysis software. The different states of haematoma such as the position, size and the extent of approaching the measuring electrode are analyzed in two-dimension model, and the feasibility of the measurement is proved.3. The mixing frequency measurement method is simulated, and the appropriate exciting frequency is assembled according to the simulation result. A method of contrasting measured values at different frequency is used to process the data, and then the regularity of the measurement is discussed.4. A double measuring-electrodes measurement strategy method is simulated. The regulation at different exciting frequency is analyzed through changing status of the haematoma.5. A hardware based on capacitance measuring method is designed, and the correlations between the injection of physiological saline solution and measuring result are found through the experiment on animal head. Compared with the simulation, the experimental tests result show that the method is feasible, and the further research is established.

Related Dissertations

  1. A village on the surface goaf impact analysis and research,TD325
  2. Research on Flange Reinforced Plane Zone at Beam-End,TU391
  3. Research on Hydraulic Slotting for Coal-gas Outbursts Control,TD713
  4. Research on Structure, Performance and Technology of Overloading Pulp Moulding,TS767
  5. Telescoping hydraulic supports dual stress analysis and fatigue life prediction,TD355.4
  6. The elastic gear structural design analysis of its dynamic characteristics,TH132.41
  7. Design-Application and Numerical Analysis of Pile-Anchor Reinforcement Structure in Deep Foundation,TU753
  8. Research on the Stress Analysis of Vacuum Box and Resonator Stability for High Power CO2 Laser,TN248
  9. Analysis and Transmission Line Dancing fiber sensor -based monitoring technology research,TP212.14
  10. Research on Fiber-end for Laser Therapy,R318.51
  11. Wanjiakouzi RCC Arch Dam Degree of Security Research,TV642.4
  12. Finite Element Simulation for Roll Forming Process of Channel Steel,O344.3
  13. Strain Gauge integrated design and calibration technology,TP212.12
  14. Based on ANSYS conservation of gypsum wallboard drying temperature simulation and impact factors of,TU526
  15. Design and Simulation for a New Combined Automotive Air Filter Used in High Concentration Dust Circumstance,U464.134.4
  16. Research of Some Package Issues about Micro and Nano Device,TN405
  17. Uplift loads squeezed branch pile load transfer law of Experimental and Theoretical Analysis,TU473.1
  18. Transverse Roadheader Cutting Head Simulation and Optimized Design,TD421.5
  19. Ship Structure Analysis and Optimization Based on Finite Element Method,U661.4
  20. Meso-damage Simulation for Bending Process of the Ship Plate,U671.84

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Automatic detection system using a variety of new technologies
© 2012 www.DissertationTopic.Net  Mobile