Dissertation > Excellent graduate degree dissertation topics show

The Research of High Power Factor Correction and Soft Switching Inverter

Author: DingYang
Tutor: ShenJinFei
School: Jiangnan University
Course: Motor and electrical
Keywords: Inverter Power factor correction Soft switching MATLAB simulation
CLC: TM921.51
Type: Master's thesis
Year: 2010
Downloads: 56
Quote: 0
Read: Download Dissertation

Abstract


In recent years, with the rising of frequency and power, the traditional inverter shows some defects at two aspects, which is low power factor and high energy loss. The paper presents a novel main circuit which is composed of power factor correction and soft switching technology. It can not only improve the grid pollution but also reduce the energy loss.The paper analyzes in detail the principle, circuit structure, work process and control of the choosen circuit. Power factor correction in main circuit is used of three phase two switch PFC circuit, which is added with two switches.The structure is simple and is working in double close-loop control, which is current loop and voltage loop. It improves the power factor of the grid under control of CCM mode and provides a stable voltage for the back-end as well. Soft switching is used of resonant DC link PWM inverter which is composed of three subswitches and resonant inductance and capacitance. The paper discusses the ZVT process of inverter bridge in the point of SVPWM. The main switch is turned on under the condition of ZVS through resonance.The characteristics of circuit is easy to control and is satisfied with different kinds of PWM mode. In addition, all the switch is working under the condition of soft switching.On the basis of theoretical analysis, the paper presents simulation and experiment to improve its feasibility. Simulating is in order to improve the compatibility, stability and loading capacity. The result strongly improves the conclusion:The system is independent with each other and EMI is low. The power factor is close to 1 and THD is 10.42%. In addition, the paper also states the control chat which is controlled by DSP2407, including hardware and software. The strong ability has been proved to test with inductive loads through soft simulation. Researching on the result of the experiment, the circuit provide high power factor and the direct current generatrix voltage can be controlled. The waveforms of current and voltage are smooth and the aberrance is small. The whole system effectively reduces the harmonic pollution, energy loss and improves the efficiency as well.

Related Dissertations

  1. The Research of a Novel High Efficiency PFC Circuit Based on One Cycle Control,TM46
  2. A Project about Intergrative Control System of Elevator Drive and Power Feedback,TP273
  3. Single phase photovoltaic grid-connected inverter control technology research,TM464
  4. Circuit Design and Simulation of Proportional Valve Controller Based on CAN-BUS,TP273.5
  5. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
  6. Design and Implementation of Centralized Controller for Modular Photovoltaic Inverter,TM464
  7. The Research on Distribution Network Protection Strategy Based on the Analysis of Fault Characteristics of Inverter-based Distributed Generation,TM77
  8. Analysis and Design of the Control System of Three-phase T-shaped Inverter with Reverse Blocking IGBTs,TM464
  9. The R&D of Drive System and Brushless DC Motor for Industrial Fan,TM33
  10. Research on DC1500V Metro Auxiliary Power Supply System,TN86
  11. Vehicle-mounted snubbing equipment maintenance control system design,TE935
  12. Milling machine beams and hydraulic ram automatic balancing systems research,TG542
  13. Protection of 20kV line to ground,TM862
  14. Inverter refrigerator system dynamics and control strategy,TB657.4
  15. TBM cutterhead system synchronization driven research,TM921.48
  16. Study on Short Time Memory Control in Attitude Control of Spacecraft,V448.2
  17. Continuous Conveyor Belt Failure Mechanism and Countermeasures,TH222
  18. 2-RRC-SPS and 2-RRC-PSS parallel robot kinematics and dynamics modeling,TP242.2
  19. Study on Miniaturized Rat-Race Couplers for Microwave Communication Systems,TN925
  20. Research on Orientation Technology Based on Satellites Navigation System,P228.4
  21. Design of Pendulum Shaft Control System of Lapping Machine for Rounded Diamond Cutting Tools,TG711

CLC: > Industrial Technology > Electrotechnical > Electrification,electrical energy application > Electric drive ( electric drive ) > Control system > Variable frequency control system
© 2012 www.DissertationTopic.Net  Mobile