Dissertation > Excellent graduate degree dissertation topics show

Research on Phase-shift PWM Driving and Control of Traveling-wave Ultrasonic Motor

Author: WangHaiYan
Tutor: ShiJingZhuo
School: Henan University of Science and Technology
Course: Control Theory and Control Engineering
Keywords: Ultrasonic motor Speed control Compound control Neural network Phase shift PWM
CLC: TM359.9
Type: Master's thesis
Year: 2009
Downloads: 28
Quote: 0
Read: Download Dissertation

Abstract


Ultrasonic motor is a new kind of actuator for motion control. Because of its special structure and different operating mechanism, ultrasonic motor has some prominent advantages which are different from the traditional electromagnetic motors. These characteristics make it has broad application prospects in non-continuous and accurate motion control fields. So, the study on ultrasonic motor’s motion control technology has drawn greater attention. However, the ultrasonic motor has strong non-linear and time-varying characteristics. In order to make full use of the motor’s great performance, the appropriate driving circuit and control strategy must be specifically designed.This paper firstly analyzes the nonlinear of ultrasonic motor driving circuit in detail, and points out the existing of control nonlinear phenomenon and their reasons. This analysis provides the basis of the reasonable design of high-performance driving devices and the improvement of control nonlinearity. Based on this analysis, the H bridge phase-shift PWM driving circuit is designed to weaken the control nonlinearity caused by driving circuit. A kind of phase H bridge phase-shift PWM control signal generator is designed using CPLD, and the SPI communication between DSP and the PWM signal generator is also realized using CPLD to ensure the reliable transmission of control information. This circuit design based on DSP and CPLD not only meets ultrasonic motor’s special requirements on control signal, but also provides complete control freedom for the control algorithm design.Based on this digital hardware platform, this paper studies the ultrasonic motor’s speed closed-loop control in detail. The closed-loop control of the amplitude of two-phase driving voltages is studied to make the two voltages’amplitude agreed with each other and controllable. This amplitude control strategy improves the operation stability of ultrasonic motor. Then, the ultrasonic motor’s high-speed start difficulty is solved using neural network start-up controller. At last, a novel multi- variable control strategy for ultrasonic motor’s speed control is designed and implemented. The strategy uses two controllable variables, frequency and voltage amplitude, to realize the harmonious control of speed.Experiments prove that, the designed driving circuit has higher control precision and good stability, and the control strategy is simple and effective.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. Well Detection Pump Steady-Speed Driving System of Brushless DC Motor,TM33
  3. Research on Feature Extraction and Classification of Tongue Shape and Tooth-Marked Tongue in TCM Tongue Diagnosis,TP391.41
  4. Study on Virtual Detector of Infrared Hyper-Spectral Image,TP391.41
  5. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  6. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  7. Research of Visual Servoing in 4-DOF Robotic Manipulator,TP242.6
  8. Research on Visual Servo System of Mechanical ARM,TP242.6
  9. Design of Weapon Detection Device Control System,TP183
  10. Municipal tourism land use planning environmental impact assessment,X820.3
  11. Research on the Inteligent System of High Performance Concrete Mix Design in Zhujiang Triangle Area,TU528
  12. Study on Taste Characteristic of Taste Peptide Enzymatic Production from Oyster Base on A Neural Network Method,TS254.4
  13. Smart Control Research in Paddy Drying Based on BP Neural Network,S226.6
  14. BP network optimization based on genetic algorithm optimization of the biodiesel process,TE667
  15. Fire Fighting System Research for the Offshore Platform,U698.4
  16. The Research on Evaluation of Living Status Systems of Expressway Relocated People,D523
  17. Research on Inspection Technology of Dehydrated Garlic Slice Based on Computer Vision,TP391.41
  18. Research and Application of Safety Assessment Method Based on Neural Network,X937
  19. The Design of the Coal Mine’s Safety Evaluation System Based on Wavelet Neural Network,TD79
  20. Study of Gray Neural Network Model of Enterprise’s Safety Devotion,X913.4
  21. Research of VRLA Battery On-line Montoring and Contorl System,TP277

CLC: > Industrial Technology > Electrotechnical > Motor > A special motor > Other
© 2012 www.DissertationTopic.Net  Mobile