Dissertation > Excellent graduate degree dissertation topics show

The Study of Spacer Structures in Field Emission Flat Displays

Author: ZhouQingZuo
Tutor: XiaoXia
School: Tianjin University
Course: Microelectronics and Solid State Electronics
Keywords: FED Spacer structure Finite Element Analysis deformation
CLC: TN873
Type: Master's thesis
Year: 2007
Downloads: 24
Quote: 1
Read: Download Dissertation

Abstract


More and more efforts have been concentrated on the studies of Field Emission Display (FED), for its high display quality and extra-thin body. The inner space of the device have to maintain vacuum to make sure the electronic movement while the displays bear 1 atmospheric pressure outside, so spacers are required in FED to prevent the distortion of display by balancing the difference of air pressures between inside and outside. But the spacers have some negative effects: such as difficult to maintain vacuum, contaminating the device, increasing the cost and deflecting the electron trajectory with charge spacers, etc. Good spacer structures are required that not only can offer better sustentation results, but also can reduce the negative effect with lesser spacer materials.The work of the thesis is about the research of the spacer structures. The main principles of FED are introduced. The thesis carries on the discussions from Finite Element Analysis theory of thin panel. Then the mechanical characteristics in various FEDs with 16:9 length-width radios in different parameters (such as spacers’ positions and spacing) are analyzed with a widely used and internationally commercial software-ANSYS. Take small size of 104×58.5mm2 for example, the importance of spacer structure is proved by calculating. From the points of view that lesser spacers get better sustentation result for the FEDs with same display areas, the diagonal-arranged spacer structure, align-arranged structure, and wall-type spacers placed transversely are profoundly discussed and analyzed, with the distributions of stress and deformation. Corresponding modified structures are advanced to optimize the spacer structures, separately.In the thesis, the spacer structures in FEDs are analyzed theoretically. The results can give some guide to the device fabricated.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Rock-fill Concrete Experiments on Comprehensive Properties and Studies on Thermal Stress,TU528
  6. Design of Testing Equipment for Electronic Products,TN06
  7. The Research of Technology for 3D Fashion Virtual Distortion and Display,TS941.26
  8. Solid Oxide Fuel Cell ferrite connect the material properties of,TM911.4
  9. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  10. Effects of Different Corn Planting Densities on Soil Moisture and Yield in Rainfed Farming Land of North-east of China,S513
  11. The Influence on the Dimensional Stability and Elastic Deformation Caused by Two Types of Disinfectant Solution to Different Impression Material,R783
  12. Based on Laser Ranging Bunton Displacement Monitoring System Design and Application,TN247
  13. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  14. Sham hose drum drive means and hydraulic system of the structure,TE973
  15. With shape memory alloy (SMA) fiber composite box driven nonlinear deformation of thin-walled beams,TB33
  16. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  17. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  18. The Construction Monitoring and Deformation Control and Analysis of the Box Culvert Jacking of the YouQuan Road Through the Hukun Railway,U449.5
  19. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  20. Study on Construction Deformation Characteristic of Deep Foundation Pit of a Tunnel Working Well,TU753
  21. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Radio equipment,telecommunications equipment > Terminal equipment > Display device,the display
© 2012 www.DissertationTopic.Net  Mobile