Dissertation > Excellent graduate degree dissertation topics show

Study on N-X Verification for High and Medium Voltage Distribution Networks

Author: LiYanXiu
Tutor: XiaoJun
School: Tianjin University
Course: Proceedings of the
Keywords: Distribution network planning N-X security verification Load transfer feeder partition
CLC: TM715
Type: Master's thesis
Year: 2010
Downloads: 43
Quote: 0
Read: Download Dissertation

Abstract


Power supply security is a main index in network planning, including the ability to avoid large scale outage and maintain constant power supply for loads after outage. From the view of planning urban distribution network, this paper proposes different N-X verification methods for high and medium voltage network, based on their specific configuration characteristic.High voltage distribution network plays an important role in connecting transmission networks and medium and low voltage distribution networks. Components (such as transmission lines, main transformers and substations) in high voltage distribution networks may be disconnected from the network when fault occurs. This operation leads to power off of main transformers in related load substation. So load transfer must be considered in N-X verification. This paper proposes a high voltage network N-X verification method considering load transfer. According to different substations’connecting mode and number of main transformers, this method uses different load transfer ways to promise constant power supply for loads. This method can simulate the operation in power system correctly.Transmission feeders in medium voltage distribution networks are very long, and they are connected through connecting switches. As a result, configuration of medium voltage distribution networks is very complicated, which results in much difficulty in load transfer. The existing N-X verification in CNP software is mainly for the network within three-sectioned and three-linked,But for the multi-sectioned and Multi-linked medium voltage distribution network, the loads transfer can not be achieved accurately. In order to avoid this shortcoming, this paper proposes an N-X verification method based on feeder partition: divide the feeders into different zones through switches, and then carry out load transfer according to feeder partition. This method not only maintain correct load transfer within three-sectioned and three-linked,but also can offer a proper way to transfer loads, how to operate and the related line load ratio after loads transfer, thus offer great help to urban network’s planning.In this paper, the algorithm function components have been preliminarily applied in“Computer-aides Decision-making System for Urban Power Network”. It has been verified by calculation actual and samples data.

Related Dissertations

  1. The thread pile and soil interaction research,TU473.1
  2. Study on the Rapid Evaluation and Prediction for the Reliability of the Urban Medium Voltage Distribution Networks,TM732
  3. Ant Colony Algorithm in biomass power distribution network planning Application Research,TM619
  4. Study on Electrical Distribution Network Planning Optimization Based on Reliability of Cost-Benefit Analysis,TM715
  5. The Analysis Research of the Mechanics Character for Single Screw Stake Under Axial Pressure,TU473.1
  6. Distribution Network Planning Including Distributed Generation,TM715
  7. Studies on Urban Distribution Network Planning and the Planning Evaluation Method,TM715
  8. Research on Distribution Network Planning of Luogang District,TM715
  9. Study the Load-transfer Mechanism of a Super-long Single Pile and the Interaction of Pile-raft Foundation,TU473.1
  10. Urban distribution network planning automatic calibration of N-1,TM715
  11. Research on Model and Algorithm for Urban Distribution Network Planning with Geographic Information,TM715
  12. Research and Application about Distribution Network Optimization Planning,TM715
  13. Research and Development of Aid-Decision System of Urban Distribution Network Planning and Management,TM715
  14. Research on Ultimate Carrying Capacity of Single Pile Considering the Effect of Soil Compaction During Pile Driving,TU473.11
  15. An Study on Cement-Soil Pile Improving Soft Foundation,TU47
  16. Study on the Behavior of Deformation and Bearing Capacity of Vertically Loaded Piles,TU473.1
  17. Study on Bearing Capacity and Deformation Mechanism of Cement-soil Mixing Pile with Concrete Core,TU472.3
  18. Thickness contact interface element and its application in a pile - soil three-dimensional,TU473.1
  19. The Analysis and Study of Distribution Load Forecasting and Planning,TM715
  20. Research on Calculation Theory and its Application of Deep-mixing Pile in Composite Ground,TU472.36

CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Theory and Analysis > Power system planning
© 2012 www.DissertationTopic.Net  Mobile