Dissertation > Excellent graduate degree dissertation topics show

The On-line Calibration System of High-voltage Current Transformer Based on Virtual Instrument

Author: ChengLei
Tutor: LiHongBin
School: Huazhong University of Science and Technology
Course: Electrical information detection
Keywords: High-Voltage Current Transformer on-line Calibration System Virtual Instrument non-synchronous Sampling Error Rectangular Convolution Window
CLC: TM452
Type: Master's thesis
Year: 2009
Downloads: 59
Quote: 1
Read: Download Dissertation

Abstract


As one of foremost electric installation, accuracy and stability of the current transformer is the vital guarantee for power system metering, protection, monitoring. However, currently verifying the CT just confines to regular maintenance, monitoring the on-line operation current transformer became a new hot spot.This paper puts forward a design of the on-line calibration system based on virtual instrument technology, which realizes the on-line monitoring of the High-Voltage Current Transformer with comparison. Full-text elaborates the theory and design proposal of the system , and discusses the various components else. The text introduces the software platform from three aspects such as the serial communication based on LabVIEW , non-synchronous sampling error compensation as well as error calculation. Finally, it carries out the uncertainty analysis of the calibration system with field testing data.Virtual instrument as a platform to achieve fourth-order rectangular convolution window of FFT algorithm can effectively reduce the measuring error caused by asynchronous sampling. The on-line calibration system based on virtual instrument technology can avoid the noise caused by hardware, and decrease the source of the measuring error. The system has achieved a high accuracy of CT measurement , which enhances both the flexibility of digital signal processing and the computing speed as well. On the other hand, the software exploitation, debugging and improving are easier, compared with the hardware circuit. The realization with virtual instrument is flexible and with low fabrication costs and short empoldering period.At present,the on-line calibration system has been tested on 220KV line with good running status, which shows that the system has satisfied 0.1 level design requirement.

Related Dissertations

  1. Study of Automobile Ignition Coil Testing System Based on Standard LAH032.905,U472.9
  2. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  3. LabVIEW-based virtual oscilloscope design and remote control,TM935.3
  4. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  5. Research and Application of Remote Virtual Instrument Experimental Teaching System Based on LabVIEW,TP391.6
  6. Research on Thin-Film Hysteresis Loop Measurement System Based on Extraordinary Hall Effect,O484.43
  7. Research on Automatic Measurement Technology of Pitch Diameter for the Rzeppa Joint Housing Raceways,TG80
  8. The Research on Test System of the Relay’s Electrical Properties and Experiment,TM58
  9. Design and Implementation of Lung Sound Analysis System Based on Virtual Instrument,TP274
  10. The Research and Application of Virtual Instrument Technology in Sensor Intelligent Measuring System,TP212
  11. Development and Experimental Study about Virtual Instruments of Vibration Test and Analysis System and Combustion Analyzer,TK407
  12. Labview-based PCR chip temperature control system,TP274
  13. Based on Virtual Instrument Simulation Load Test System Design,TP274
  14. Small aperture glass-ceramics based on helium-neon laser fundamental transverse mode selected experimental study,TN248
  15. Hundred-ton hydraulic vibration damper test rig and its Control System,TB534.2
  16. Gunships simulation cockpit system design and implementation,V216.8
  17. Auto pedal control mechanism assembly test rig design and its key technologies,U467.5
  18. Based on LabVIEW typical communication signal modulation , parameter identification and simulation experiment,TP274
  19. Research of Rutting Test Data Acquisition System Based on Vritual Instrument,U414
  20. Study on Portable Strain Monitoring System of Mechanical Equipments for High-speed Railway,U215.6
  21. Research on Power Monitoring and System Control of Hydraulic Power System Based on Virtual Instrument,TH137

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Transformer > Current transformer
© 2012 www.DissertationTopic.Net  Mobile