Dissertation > Excellent graduate degree dissertation topics show

Research on High Power Bidirectional DC/DC Converter

Author: GaoJinPing
Tutor: HuangShengHua
School: Huazhong University of Science and Technology
Course: Motor and electrical
Keywords: Bidirectional DC / DC Three-phase PSM PWM
CLC: TM46
Type: Master's thesis
Year: 2009
Downloads: 163
Quote: 0
Read: Download Dissertation

Abstract


Bi-directional DC / DC switching converter is based on two-way transmission of energy is necessary to readjust the DC to DC converter. DC uninterruptible power supply in systems such as aerospace power systems, electric vehicles, as well as occasions such as solar cell converters have a wide range of applications. In this paper, a shift-based control technology with the new topology of isolated DC/DC converter for a more in depth research and design of the prototype, while another type of high-power non-isolated bi-directional DC/DC conversion topology structure of the theory of a certain depth of analysis and research.Isolated-type DC/DC converter is input using super capacitor (UC) bi-directional three-phase active bridge DC/DC converter with isolation, high power density, high efficiency, large voltage change than characteristics. Main circuit of this converter using phase-shifting bridge have this structure, the main circuit without additional components, can be opened to achieve zero-voltage soft-switching technology, the switch reduces the wear and tear, but also can greatly increase the switching frequency, reducing the switching device current stress, reduces the circuit size of the electromagnetic device to improve the system’s power density and efficiency; in the control, using PWM modulation and a combination of phase-shifted control method, a flexible control method, voltage conversion range, with three-phase transformer transmits energy, high efficiency, good output. Circuit side of the original three-phase coupled inductors can reduce the current ripple, three-phase coupling to reduce the number of core, lower core loss. This circuit can automatically follow the load changes, is a very suitable for applications where high-power DC/DC converters, can be widely used in large, medium-power applications in the distributed power generation and fuel cell-powered electric vehicles more occasions there are a lot of potential and promising applications.In addition, this paper also a new type of non-isolated DC/DC converters, and logic analysis to explore. Mainly from the multi-phase Buck (Buck-Boost) converter to start, and the results of the analysis and isolation-type bi-directional DC/DC to conduct a more detailed comparison, comparing the high-power bi-directional DC/DC converter topology with non-isolated isolation topology of the strengths and weaknesses in order to adapt with different work.

Related Dissertations

  1. Model of Cylinder Controlled by On-Off Valve and System of PWM Control,TH138
  2. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  3. Research of Active Power Filter in Three-phase Four-wire System,TN713.8
  4. Three-phase line current balance of reactive power compensation technology,TM714.3
  5. The Controller Design of Commercial Vehicle EPS Based on CAN Bus,U463.6
  6. The development and the development of new magnetic electrical detonator initiation,TD235.22
  7. Study and Realization on the High Power Factor Switching Power Supply,TN86
  8. Design of Controller on Solar LED Lighting System,TM923.34
  9. The Research on a Battery Charging and Discharging Device Based on Three-phase PWM Rectifier,TM461
  10. The Application of PWM Technology in AC-drive Electric Locomotive,TM461
  11. Design of a Digital High-Voltage Power-Supply Based on CPLD,TM46
  12. Based on sigma-delta modulation , low noise , high efficiency buck DC-DC converter with,TM46
  13. The Study of Micro Electrical Energy Storage System,TM92
  14. The Design of Vertical Axis Wind Turbine Voltage Controller,TM315
  15. Research on Torque Ripple Minimization Techniques for Permanent Magnet Brushless Dc Motor,TM33
  16. Control Technique of Cascaded H Bridge Static Synchronous Reactive Compensator,TM464
  17. Research and Design of A High Efficiency and High Step-up Ratio Converter Based on BOOST DC-DC,TM46
  18. Three-Phase High Performance Double-Conversion UPS,TN86
  19. Research on APFC-based Single phase High frequency PWM Rectifiers,TM46
  20. The Design of Boost DC-DC Converter in Digital Camera Application,TM46

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter
© 2012 www.DissertationTopic.Net  Mobile