Dissertation > Excellent graduate degree dissertation topics show

Performance Analyzes on the Flashover Voltage Characteristic of Insulator Strings Under Polluted Conditions

Author: QiFei
Tutor: ChenJunWu
School: Huazhong University of Science and Technology
Course: High Voltage and Insulation Technology
Keywords: insulator string pollution severity voltage distribution flashover
CLC: TM216
Type: Master's thesis
Year: 2009
Downloads: 77
Quote: 0
Read: Download Dissertation

Abstract


Contamination flashover of insulator strings is one of the most serious natural disasters, and it is also one of the most important pacing factors for determining insulation coordination of power system. A large number of researches about the influence of the equivalent salt deposit density(PESDD)on AC flashover voltage(Uf)of polluted insulators have been done home and abroad, but the research on the influence of the non-soluble deposit density(PNSDD)on Uf is few. And the relationship among Uf, PESDD and PNSDD has never been found. For each insulator shape, flashover occurring on the insulator surface has been determined with no surface pollution, uniform surface pollution and also partial surface pollution. For partial pollution, it has few cases been studied, the relationship between AC flashover voltages of contaminated insulators and the different sections of the insulator surface are polluted must be further researched.Base on measurement results of some out-door insulators, the strings under lower pollution severity had higher prosperity to flashover. Transmission line routes are located in different geographical environments, different weather conditions and different grades pollution. In this paper, a lot of laboratory experiments were carried out on artificially polluted XP-4.5 insulator strings in accordance with the standards IEC 60507:1991< Artificial pollution tests on high-voltage insulators to be used on a.c systems >. The article based on the result of pollution test, analyze on the flashover voltage characteristic of insulator string. Summing up the conclusion, the flashover voltages of single-chip insulator in contrast with the size of polluted surface. The voltage distribution of multi-string insulators relative to the shape of pulluted surface.The temperature and humidity also can make it changed. The results of study can be used to enrich the insulator strings flashover mechanism of frequency voltage transmission line, conform to the way of installation for the safe operation of the circuit and provide some guidance for the structural optimization of insulator and the connection fittings. It can also used to design the voltage-sharing measures for improving the voltage distribution. With the aim of benefiting the advanced study for setting up the effective standards of pollution severity.

Related Dissertations

  1. Based on the DC leakage current research insulator flashover,TM216
  2. The Research on Novel Medium-voltage Distribution Line Carrier Technology and Its Application in Distribution Automation,TM73
  3. Study on Insulation Flashover Criterion for Lightning Performance Calculation,TM862
  4. Research on Triggered System of Main Switch of SG-Ⅲ Energy Module,TM564
  5. Research on Method of Line Loss in Low-voltage Distribution System for Hybrid Wiring,TM744
  6. Electromagnetic Analysis and Structural Improvement of Current Transformer under Plateau Environment,TM452
  7. Performance Analyzes on the Flashover Voltage Characteristic of Insulator Strings under Polluted Conditions,TM216
  8. Research on Kangbashi Low and Medium Voltage Distribution Network Planning Project,TM715
  9. The Research on the Examination and Failure Diagnosis for Leakage Current of Insulator on the Power Line,TM216
  10. Study on the voltage distribution in the organic light emitting device,TN383.1
  11. Analysis of the Hilbert Spectrum of Insulator Leakage Current and Abstraction of the Characteristics,TM216
  12. Research on the Lightning Induced Over-voltage and Flashover Probability of the Distributed Power Network,TM862
  13. Research on Suspension Insulator Detection Methods,TM216
  14. Hybrid electric field breakdown of oil-paper insulation system and surface flashover characteristics of,TM855
  15. Effect of Icing on Insulator’s Surface on Flashover,TM216
  16. Weather Statistics Filthy and Dirty Flash Design and Application of Early Warning,TM216
  17. Study on East China Grid Transmission Line Insulator Saturated Contamination (Salt Density) the Characteristic and Outside Insulates Configuration Method,TM216
  18. Test Method Investigation of Hydrophobic Coatings’ De-icing Effect Assessment,TM75
  19. The Preparation of Super-hydrophobic Coating and the Research on Its Icing Characteristics,TM216
  20. Study on Physics-mathematics Model of Resistance of Remaining Pollution Layer of Polluted Insulator After Partial Arc,TM216

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Insulating materials,dielectric,and its products > Insulator and casing
© 2012 www.DissertationTopic.Net  Mobile