Dissertation > Excellent graduate degree dissertation topics show

Study and Design on DC-DC Converter for a 1KW Solid Oxide Fuel Cell Power System

Author: ZhouYing
Tutor: DengZhongHua
School: Huazhong University of Science and Technology
Course: Control Theory and Control Engineering
Keywords: SOFC Push-Pull Forward converter(PPFC) CDD buffer circuit saber simulation
CLC: TM46
Type: Master's thesis
Year: 2009
Downloads: 48
Quote: 0
Read: Download Dissertation

Abstract


There are many advantages of SOFC(solid oxide fuel cells),it is a high efficiency power generation and environmentally friendly green energy. In the SOFC power generation system,DC-DC converter is a very crucial aspect, and has a great impact on whole system’s cost, performance,and efficiency in particular.Therefore, considering various factors, design the DC-DC converter to meet the requirements has became really important.In this thesis, firstly gives an analysis of the special requirements to the DC-DC converter in SOFC power generation system, and considers output characteristics of 1kw fuel cell system,selects the push-pull forward converter (PPFC).This converter improves from push-pull circuit, particularly suitable for the low-voltage high-current occasion,where the DC-DC converter of SOFC power generation system works in.And then discusses the adding of CDD buffer circuit into converter to restrain rectifier diode peak voltage,and gives a detailed analysis of working principle of push-pull forward converter with double CDD buffer circuits.According to working principle of the circuit,and combined with input and output characteristics of DC-DC converter in 1kw SOFC system,gives detailed hardware parameters design and devices selection of the push-pull forward converter. According to the design parameters of converter circuit,structures the SABER-based open-loop simulation model,gives an analysis and verifies the working status of the push-pull forward converter circuit,focusing on the verification of the effect of CDD buffer circuit to restrain rectifier diode peak voltage. Analyzes a inverter prototype working condition in 1KW SOFC power generation conversion experiment platform.Finally, gives an analysis of the shortages of push-pull forward converter,and discusses the improving scheme and circuit,as the forward-looking and reference of further optimization and design for the DC-DC converter in 1KW SOFC power generation system.

Related Dissertations

  1. The Performance Research of Coal-based SOFC/IGCC Combined Cycle Power Generation System,TM611.3
  2. Research on Fabrication Process of Single-Chamber Solid Oxide Fuel Cells,TM911.4
  3. The Oxidation Behavior of Fe-Cr-xMn Alloys and Preparation and Characterization of Ni-Supported SOFC,TM911.4
  4. Fabrication of Anode/Electrolyte Bi-Layer for Solid Oxide Fuel Cells by Single Step,TM911.4
  5. Research on Quote Counterattack Technique for Image-based Network Public Opinion Attack,TP391.41
  6. Investigation on the Properties of (La, Pr) SrMnO Perovskite Cathode Materials of Solid Oxide Fuel Cell,TM911.4
  7. Synthesis and Properties of B Site Doped LnGaO3 -Based Solid Electrolytes （ln=la,pr,Nd）,TM911.4
  8. The Research on Hot Swap Technology of Power Supply,TM46
  9. The Study of SoFc Electrolyte/Anode Based on YSZ,TM911.4
  10. Deposition of Anode Functional Layer and Electrolyte Layer for Metal Supported SOFC by EB-PVD,TM911.4
  11. Fabrication of Zirconia Electrolyte Film and Its Application for Intermediate to High Temperature Fule Cells,TM911.4
  12. Research on Copper-Based Anode Material of Direct Hydrocarbon Fuel Cell,TM911.4
  13. Investigation on Performance and Mechanism of BaSrCoFeO Cathode Modified with Nano-structured Silver,TM911.4
  14. Composite Anode Materials Based on Mn/Fe Doped （La, Sr）CrO3-δ for Solid Oxide Fuel Cell,TM911.4
  15. Preparation and Performance Investigation on Pr2NiO4 Based Composite Cathode for Solid Oxide Fuel Cells,TM911.4
  16. Study on Preparation and Properties of Metal-Supported Solid Oxide Fuel Cell,TM911.4
  17. Study on Cathode Material of Solid Oxide Fuel Cell Based on Pr1.6Sr0.4NiO4,TM911.4
  18. Application of Micro-Nano Fibers in Solid Oxide Fuel Cell,TM911.4
  19. Study of the cathode current collector of the solid oxide fuel cell,TM911.4
  20. The Oxidation Behavior of Fe-Cr-xMn Alloys and Preparation and Characterization of Ni-supported SOFC,TM911.4

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter
© 2012 www.DissertationTopic.Net  Mobile