Dissertation > Excellent graduate degree dissertation topics show

Study on the Characteristics of the XD-1 New-style Taper Spiral Packing

Author: ZhuZanQiang
Tutor: ZhouDaJun
School: Xiangtan University
Course: Chemical Engineering
Keywords: taper spiral packing pressure drop hydrodynamics mass transfer efficiency
CLC: TQ053.5
Type: Master's thesis
Year: 2008
Downloads: 43
Quote: 0
Read: Download Dissertation

Abstract


Packed tower is the most useful equipment in gas-liquid mass transfer process in chemical industry. As the core part of the packed tower, packings play an important role in the tower operation.Compared with the traditional packings, XD-1 new-style taper spiral packing has special structure and completely different hydrodynamics characteristic, so taper spiral can make gas-phase reversedflow transformed into the crossflow in structured packing. XD-1 new-style taper spiral packing, which has some advantages such as great flux, low pressure drop, easy-making, high mass transfer efficiency, is so efficient that it has a bright prospect in industry.The experiment studied the taper spiral packing from its hydrodynamics and mass transfer characteristic. The air-water system was used to measure the hydrody- namics of the packing in a cold simulating experiment tower with a diameter of 80 mm. The kinetic factor was from 0.12 to 0.80, while the liquid flux was from 0 to 56.59 m3/(m2﹒h). A comparison was made among taper spiral packing,θ-ring packing and metal gauze corrugated packing. For the case of mass transfer, on the one hand, taper spiral packing ,θ- ring packing and metal gauze corrugated packing were tested using the air-sulfur dioxid - water system. In this part, the kinetic factor was from 0.12 to 0.30, while the liquid flux was from 11.32 to 33.92 m3/(m2﹒h), on the other hand, a series of total reflux separation experiment for ethanol- water solution had been carried out among taper spiral packing,θ-ring packing and raschig ring packing in two hot simulating towers with the diameters of 25 mm and 50 mm, and the number of theoretic plate N were studied.The experiment results showed that the taper spiral packing was better thanθ- ring packing, raschig ring packing and metal gauze corrugated packing both in hydrodynamics and mass transfer characteristic. The results showed the voidage ratio of taper spiral packing,θ- ring packing and metal gauze corrugated packing was 0.823:0.947:0.855,and under the same liquid sprayed density, the pressure drop ratio of unit height of packing layer was 0.58:1.10:0.62. The HTUs, which were studied in the cold simulating experiment tower, showed that the taper spiral packing had better performance thanθ- ring packing and metal gauze corrugated packing, and the HETPs, which were tested in the hot simulating experiment, indicated that the taper spiral packing had higher mass transfer efficiency thanθ- ring packing and raschig ring packing.In addition, the experience formula of gas pressure drop of the taper spiral packing was established under different kinetic factors and liquid sprayed densitys. Meanwhile, a mechanics model was developed to predict pressure drop in packed columns equipped with taper spiral packing, where the flow and physical property characteristic of the systems as well as geometric variables such as the taper were taken into account. The model was applied well to several sets of pressure drop experimental data. The result could be of value to the development and design of taper spiral packing.The superiority performance of the taper spiral packing were further studied, the experiment results experiment were application foundation for taper spiral packing in industry.

Related Dissertations

  1. Temperature and Pressure Drop Analysis and Its Application in CO2 Corrosion Evaluation of Subsea Pipeline,TE832
  2. The Feature of Sediment Yield and Hydrodynamics of Different Underlying Surfaces in the Construction of the Shenfu-dongsheng Coal Field,S157.1
  3. The Value Simulation of the Filtration Process by Fiber Filter Materials,TB34
  4. Study on Real-time Screen Space Fluid Rendering,TP391.41
  5. SPH method for tank sloshing and dimensional analysis,U661
  6. Simulation and Experimentation of Wave Energy Converter of Inverse Pendulum,TM612
  7. IF Steel in RH decarburization model,TF704.5
  8. Study on Performance of New Fixed Valve Tray,TQ053.5
  9. Research on Hydrodynamics of Marine Current Turbine’s Hydrofoil Blades Based on Lattice Boltzmann Method,TK730.1
  10. Research on Liquid Sloshing in Aircraft Fuel Tank with SPH Technique,V228.11
  11. SPH Method for Object-oriented Design and Post-processing,TP311.52
  12. Modeling and Rendering of the 3D Cartoon Water,TP391.41
  13. Research on the Role of Extracellular Proteinase Inhibitor Expi in Rat Liver Regeneration,Q343
  14. Effects of Gene of Kruppel-Like Factor 4 Klf4 on the Process of Rat Liver Regeneration,Q343
  15. Research on the Role of Sry-box2 Gene SOX 2 in Rats Liver Regeneration,Q343
  16. Effects of Gene of Lipocalin 2 lcn2 on the Process of Rat Liver Regeneration,Q343
  17. Numerical Simulation of Bubbling Dynamics in Gas-Liquid Columns with Volume of Fluid Method,O359.1
  18. Performance of Aeration with Pure Oxygen for Quick Control of Black and Odor in River and Influencing Factors,X703
  19. The Research of a New Style Extraction Process in Droplet-film Alternative Flow,TQ028.32
  20. Study on the Optimization of Bending-duct in Road Tunnel and Smoke Outlets’ Layout in Fire,U453.5
  21. Transient Heat Transfer Numerical Method Using Somoothed Partickle Hydrodynamics,O551

CLC: > Industrial Technology > Chemical Industry > General issues > Chemical machinery and apparatus, equipment > Chemical general machinery and equipment > Tower chemical equipment
© 2012 www.DissertationTopic.Net  Mobile