Dissertation > Excellent graduate degree dissertation topics show

Study of Piezoelectricity Ceramics Parameter Compositive Testing System

Author: YangHe
Tutor: GongShuPing
School: Huazhong University of Science and Technology
Course: Microelectronics and Solid State Electronics
Keywords: Piezoelectric AD9858 Phase comparing DDS Objective Oriented Programming VC++
CLC: TM282
Type: Master's thesis
Year: 2007
Downloads: 214
Quote: 3
Read: Download Dissertation

Abstract


As we know that piezoelectric ceramics are ferroelectric poly-crystals which are polarized. The parameters of piezoelectric ceramics are determined by the manufacturing process, chemical component, sintering process, and polarization process. The key parameters of the piezoelectric ceramics are important to researching and using in practice. With the piezoelectric ceramic widespread availability, the measuring method is more regarded. Dynamic resonance method is applied widely on measuring the parameters of the piezoelectric ceramics rather than static measurement.From the point of the piezoelectric ceramics measuring standard, according to the new method of computer aided design and the development trend of virtual instrument, we discuss a new method to measure withπform resistance network zero phase based on Direct Digital Synthesis technology.Key component of the virtual instrument is software. This dissertation presents discussion and design of system modules, including the instrument panel module, signal resource controlling module, data acquisition and disposal module. We also approach the algorithms for data processing and parameters calculation. The extendibility, transplantation, reusing and function of the module program are studied.At last, we calibrated this system, and compared the measured data of the same sample with those measured by HP4192 Impedance Analyzer.

Related Dissertations

  1. Development of LXI Arbitrary Waveform Generator,TM935
  2. Piezoelectric ultrasonic vibration hopper small study,TB559
  3. A Study on Semi-active Multi-modal Vibration Damping Based on State-Observer,TB535
  4. Research on Saint-venant’s Torsion of Composite Circular Shafts,O346.1
  5. Design of Multi-channel Function Generator with External Synchronous Single-cycle Trigger,TM935
  6. The Design of Pulsed、Constant and AC Magnetic Field Signal Generator,TM935
  7. Analysis of the Effects of Electrode on Vibration of Piezoelectric Plate with Dissipation,O327
  8. Theoretical Analysis and Research for Performance of High-pressure and High Water-based and Mass Flow Electro-hydraulic Valve for Powered Support,TD355.4
  9. Research on Micro-fluid Drving of Microfidic Array Opticl Switch,TN929.1
  10. The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
  11. The Research of Frequency Hopping Technology Based on DDS,TN741
  12. Research on Detection System of Physiological Signal Base on PVDF Piezoelectric Thin Film Senor,TP212
  13. Research of Vibration Measurement and Analysis System Based on VC++,TH165.3
  14. Precision micro- displacement worktable vertical scanning white light interferometer,TH744.3
  15. Study on the Measurement System of Transparence Surface Topography with Sodium Light Interference,TH744.3
  16. The Characteristics of High Viscosity Piezoelectric Micro Jet,V467
  17. Research on Frequency-shift Signal Generator of Railway Base on μC/OS-Ⅱ,U284
  18. Research on Urban Railway Traffic Zone Controller,U284.48
  19. The Development Application and Improvement of Vehicle Scheduling Program Simulation System,U492.22
  20. The Time and Frequency Domain on Test Theory and Method of Pzt Piezoelectric Ceramics Thick Film Using Ultrasound,TM282
  21. Research on Radial Bengding Mode Ultrasonic Motor Using Embedded Piezoelectric Elements,TM359.9

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Electric and ceramic materials > Piezoelectric ceramics
© 2012 www.DissertationTopic.Net  Mobile