Dissertation > Excellent graduate degree dissertation topics show

The Compressive Behavior of Reinforced Concrete Columns with GFRP a Nonliner Finite Element Analysis

Author: ZhaoHongXia
Tutor: ChengHeMing
School: Kunming University of Science and Technology
Course: Engineering Mechanics
Keywords: GFRP reinforced concrete column strengthening finite element analysis nonliner ANSYS secondary loading
CLC: TU375.1
Type: Master's thesis
Year: 2008
Downloads: 51
Quote: 0
Read: Download Dissertation

Abstract


Overseas, Fiber Reinforced Polymer(FRP)composites have been increasingly used in rehabilitation and strengthening of concrete structures. In china, because don’t completely know this mateial, at present,tests and theories have been the most. The secondary load effect is inevitable in the structure rehabilitation and strengthening process. However, most of the existing researches referring to the confinement of concrete columns with FRP materials don’t consider the effect of sustained loading on the column during repair strengthening.conceming the practical condition, a nonliner finite element analysis by ANSYS is run to study the compressive behavior of reinforced concrete columns with GFRP considering the secondary load effect.Firstly, in this thesis,discussing GFRP mechanotheropy and excellences.The basis theories and analysis modal of Finite Element Method (FEM)are recommended, especially constitutive relations of materials, damage criterion and elements selecting of concrete, reinforcing steel bar and GFRP. Secondly, three dimension modal of the reinforced concrete column strengthened with GFRP is formed by ANSYS, and simulate the strengthening column.then contrasting with the previous test results,various mechanics performances are quantitaive analyzed and the calculation precision and practicability of FEM are validated. Subsequently, the substantiality concrete column strengthened with GFRP considing secongary loading is simulated by elements birth and death, and contrast with the results of the test disregarding to the secondary loading. The influences of the secondary loading on the strengthening structure are obtained.All methods and results have important practical significance to the analysis of secondary loading and the reinforcing design of the reinforced structures in this thesis. Since some experiments cost not only lots of money, but also people resource and time are saving.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  5. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  6. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  7. Design of Testing Equipment for Electronic Products,TN06
  8. Broken walnut shell force testing and virtual prototype design of the main components of walnut sheller,S226.4
  9. Research on a Fire-fighting Shell for Towers,TU892
  10. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  11. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  12. Sham hose drum drive means and hydraulic system of the structure,TE973
  13. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  14. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  15. Bearing Capacity of Cast-in-place Piles in the Karst Region of Yichun, Jiangxi,U213.1
  16. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  17. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  18. Structure Analysis and Optimization Design for 150 Tons Flat-Top Crane,TH213.3
  19. The Surrounding Rock Monitoring and Finite Element Simulation of Subway Tunnel,U455.43
  20. Simulation of the Clinching Process Using FEA Method with Steel and Aluminum Alloy Sheets for Automotive Sunroof Frame,U463.83
  21. Numerical Simulation Research on Optimal Milli-second Delay Time with Many Free Surfaces Hole by Hole Blast,TD235

CLC: > Industrial Technology > Building Science > Building structure > Concrete structure,reinforced concrete structure > Reinforced concrete structures > Girder
© 2012 www.DissertationTopic.Net  Mobile