Dissertation > Excellent graduate degree dissertation topics show

The Research of Bearing Capacity and Influence Factors of Steel-tube Truss Nodal Using Screw

Author: ShiHongLei
Tutor: WangXiaoPing
School: Wuhan University of Technology
Course: Structural Engineering
Keywords: light-gauge steel joist structure system Steel-tube truss Clip Limit bearing capacity Failure model Finite element analysis Influence
CLC: TU392.3
Type: Master's thesis
Year: 2008
Downloads: 18
Quote: 0
Read: Download Dissertation


The research object of this thesis is a new kind of light-gauge steel joist structure system. The basic unit of this system is truss, which is composed of square (rectangular) tubes and clips connected by screws. Because of possessing many advantages such as light weight, higher standardizing, assigning space flexible, good performance of the seismic resistant, industrialization producing, short constructing period, protecting environment and economizing energy source etc, this system is widely used and studied. This structure system is at the stage of popularization and researching in China, but the market demand is so large for the low/multiple-story residential building and middle/small span building.Taking the steel-tube truss nodal connected by standard clips and screws as the research object, this thesis covers the followings:For the new light-gauge steel joist structure system, the connecting method of each kind of steel truss nodes is introduced in this thesis, the reason is found for the nut cap of screw being sheared under the designing load, and a designing method is provided for the nodes which connected by screws and clips.Base oh the experimental results, the thesis provides the finite element building techniques of clip nodes; gets the limiting bearing capacity and failure model of classical clips under station of axial press. The finite element analysis results are compared with the experimental data, proving the building model method is precise, which can be taken as a theoretical analysis method for these kinds of nodes.Base on a series of finite element analysis, considering the change of thickness of clip and tube, the limit bearing capacity and load-displacement curve of each kind of clip nodes are obtained, which are provided references for the clip nodes designing.The research results of the thesis can provide the theoretical supporting and numerical reference for the application of the new light-gauge steel joist structure system.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Development of Turbine Rotor Dynamic Balance System,TH877
  5. Research on the Correlation between Formative Assessment in College EFL Class and Students’ Learning Attitude,H319.3
  6. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  7. Broiler Responses to Reduced-protein Diets Suppleme Nted with Synthetic Amino Acids and Small Peptides,S831.5
  8. The Study in the Influence of the Cell Phone on the Moral Values of the College Students and the Countermeasure,G641
  9. Design of Testing Equipment for Electronic Products,TN06
  10. Research on the Regional Difference and Influence Factors of China’s Carbon Emissions,X502
  11. Research on Values of Post-90 Generation under the Influence of the Current Pop Culture,C913.5
  12. Research on Present Situation and Influence Factors about Young Chrendren’s Tennis in Xi’an,G845
  13. Network language surveys and studies of vocational school students' language usage,G715
  14. Study on the Rural Left-behind Children’s Studies Question and Its Factors Based on the Case of Min-le Middle School of Conghua, Guangzhou,G521
  15. The Influence of the Primary School Class Cadres’ Selection Mode on the Students’ Democratic Participation Ability,G625.1
  16. The Research of Concrete Shrinkage and Creep Experiment,TU528
  17. Brezhnev period of Soviet oil and gas industry development and its impact,F416.22
  18. Spatial Analysis and Pollution Evaluation about Water Environment Actuality of Rural Surface Water in Typical Regions of Jiangsu Province,S271
  19. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  20. The Diagnosis of Modernity of Marx to Enlighten to Human’s Development,A811
  21. Research of Chinese Official Think Tanks Affect Government Decision,D630

CLC: > Industrial Technology > Building Science > Building structure > Metal structures > Various types of steel > Steel structure
© 2012 www.DissertationTopic.Net  Mobile