Dissertation > Excellent graduate degree dissertation topics show

Surface-modeling and 5-axis CNC Machining for Integral Impeller

Author: GuYuNa
Tutor: XiongYouLun；XiongCaiHua
School: Huazhong University of Science and Technology
Course: Mechanical and Electronic Engineering
Keywords: Integral impeller NURBS Surface-modeling 5-axis Post processing
CLC: TG659
Type: Master's thesis
Year: 2007
Downloads: 793
Quote: 11
Read: Download Dissertation

Abstract


Integral impeller is a type of free form surface part. Its design and manufacture precision decide machine’s thrust efficient directly. There are professional propeller CAD/CAM software overseas, but these software are very expensive and their practicability are very bad, many national factories can not pay them. It is the best way to solve all problems to designing professional software with independent intellectual property rights.To carry out 5-axis manufacturing, the CAD/CAM technology of complicated impeller surface is studied in detail in this project. The primary aspects of the thesis are surface- modeling of integral impeller and post processing of special 5-axis machine. The content of the thesis is as follow:Based on the principle of 5-axis, the necessity of manufacturing integral impeller using 5-axis CNC machine is analyzed from several aspects. Based on the geometry characteristics of integral impeller, discussing the requirements of surface-modeling using principle of pneumatic. The NURBS technique of surface fitting is thoroughly researched. Programming on personal computer completes the surface fitting applying NURBS technique. According to this, any order NURBS surface can be generated.IGES is introduced, programming completes transforming from computational results to IGES. According to this, geometry sculpt is finished in UG. The quality of free form surface is analyzed applying technique based on curvature and illumination respectively.The key problems of NC and processing of 5-axis manufacturing are analyzed, meanwhile, interposition and collision are researched.Based on the post processing algorithm of arbitrary structure 5-axis machine and principle of general post processing, completing the post processing of HSM600U in UG/Post Builder.In the end, the results and conclusions of this thesis are summarized, and the prospect of further research on this project is opened up.

Related Dissertations

  1. The Method for Inertial Platform Testing and Parameter Identification,V249.322
  2. The Design and Analysis of C Axis Feed Index Device of High Precision Heavy NC Machine Tool,TG659
  3. Analysis of Shovel Welding Residual Stress Based on Finite Element Method,TG404
  4. Conjugate curve based on free cam beating , wefting reverse and parametric design,TS103.3
  5. Ring light in the Fizeau interferometer system design and research,TH744.3
  6. The Research on Control Precision Model of SCARA Robot for Multi-point High-speed Assembly,TP242.2
  7. Study on Measurement Technology and Expression of Twin-screw Compressor Rotor Profile,TH45
  8. Motion Controller System Software Design and the Study of Motionsmoothing Processing,TG659
  9. Digital Technology and Interpretation of Architecture,TU201
  10. CNC machining based on a unified mathematical model of the tooth surface of spiral bevel gear,TH132.41
  11. Research on Three-DOF Gelatinizing Robot and Its Control System,TP242.2
  12. Research on Watermarking Algorithms for NURBS Model Based on Wavelet Transform,TP309.7
  13. Research on Interpolation Algorithm for Complex Curve Based on Forward Feed Control,TG659
  14. Research of NURBS Curve Interpolation and Development of Open-architecture CNC System,TG659
  15. Research on Modeling and Interpolation Algorithm for Stream Turbine Blade,TK263.3
  16. Research and Application of GAMMA Correction Based on NURBS,TP391.41
  17. SPOT5 remote sensing image based automatic classification and treatment of,P237
  18. Study of Automatic Events Extraction on the Seismic Profiles Methods Based on the QT Platform,P631.4
  19. Research on Fingerprint Identification Algorithm and Its Hardware Design,TP391.41
  20. The Changing Features of the OPG-RANKL-RANK Expressing on the Progressive Increase of Training Load of Female Rats,G804.2
  21. On \,I712

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Program control machine tools, CNC machine tools and machining
© 2012 www.DissertationTopic.Net  Mobile