Dissertation > Excellent graduate degree dissertation topics show

Experimental Study on Seismic Performance of Special-shaped Column Interior Joints Reinforced by Fiber Concrete

Author: ZuJianQuan
Tutor: WangTieCheng
School: Tianjin University
Course: Structural Engineering
Keywords: fiber specially-shaped columns interior joints seismic behavior shear capacity
CLC: TU375.4
Type: Master's thesis
Year: 2010
Downloads: 66
Quote: 0
Read: Download Dissertation

Abstract


The special-shaped reinforced concrete columns have been widely used in China in recent years. To develop and improve special-shaped columns of reinforced concrete, domestic researchers have done lots of tests on components,such as beam-column joints and RC frames of special-shaped columns. The results show that: Since the form of special-shaped column section makes the joints of special-shaped column weaker than those of rectangular columns, the building height and the scope of application of special-shaped column structure are limited. It is important to improve the seismic performance of joints of special-shaped column structure, which increasing the building height and expanding the scope of application.In this paper, the author proposes that fiber concrete can be used to reinforce the weak parts of special-shaped columns structure, and demonstrates the feasibility by theoretical analysis and low-cyclic reversed load test on joints of special-shaped column reinforced by fiber concrete and the joints of ordinary concrete special-shaped column under the same condition.In this paper, the author has applied the joint model of polypropylene fiber reinforced concrete, steel fiber reinforced concrete and ordinary fiber reinforced concrete special-shaped columns to core area of the joints of special-shaped columns and beam ends intersecting the core area, low cyclic tests are conducted, the seismic performance of the six special-shaped column’s joints are carried on. The results show that: pouring the steel fiber reinforced concrete into special-shaped column joints can improve the failure characteristics, improve the cracking load of joint core area, reduce the crack width, slow the stiffness degradation, and improve the shear capacity.In this paper, the shear mechanism of special-shaped column joints and fiber concrete joints are studied based on rectangular column joints, the bearing capacity of special-shaped column joints is analyzed, cracking load of special-shaped column joints is studied, the largest plane core shear of shaped column joint, and the plane shear of joint core as the shear fracture of core area is 0.2mm.

Related Dissertations

  1. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  2. Design and Study on Movable Packing Machine in Acrylic Fiber Production Lines,TH248
  3. Temperature Drift Modeling and Compensation of Fiber-Optic Gyroscopes,V241.5
  4. The Environmental-Friendly Method and Process of Removing Non-Cellulosic Matters from Bamboo for Textile Fiber,TS652
  5. Phosphoproteomics Studies on Cotton (Gossypium Hirsutum) Fiber Initiation Development,S562
  6. Research on Detecting Optical Fiber Geometric Parameter Based on Machine Vision,TN253
  7. Expressive Characterization of Transcription Factors in Cotton Fibre Initiation and Cloning and Characterization of Three Transcription Factor Genes in Gossypium Hirsutum L.,Q943
  8. Research on Identification System of Cashmere and Wool Fiber,TS101.921
  9. Characteristic of Nitrogen Accumulation and Distribution in Cotton Bolls Bloomed at Different Date and Its Effction on Cotton Bolls Quality Formation,S562
  10. Effects of Cotion Planting Population on the Formation of Cotton Boll (Cotton Fiber, Cottonseed) Quality,S562
  11. Retrospective Study on Pathological Results, Four Results of Liver Fiber, and TCM Syndrome Type of 164 CHB Patients,R259
  12. Modification of SEBS Rubber Via Living Radical Polymerization,TQ330.6
  13. The Design of the Interferometric Fiber-optic Microphone System Based on 3X3 Coupler,TN912.2
  14. Research on Sensing with High Birefringent Photonic Crystal Fiber,TP212
  15. Fabrication, Characterization and Biocompatibility of Liquid-Electrospinning Novel Three-Dimensional Scaffolds,R318.08
  16. Studies on the Preparation and Properties of ACF/PLGA Scaffolds for Bone Tissue Engineering,R318.08
  17. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  18. The Microcirculation Dysfunction and the Expression of Fgl2 in the Rat Model of Acute Cerebral Ischemia/reperfusion,R743
  19. Study of Composite Drive Shaft for an Automobile,U465.6
  20. The mechanical properties of fiber reinforced concrete research and finite element analysis,TU528.572
  21. Kapok fiber assembly compressive properties of,TS102.2

CLC: > Industrial Technology > Building Science > Building structure > Concrete structure,reinforced concrete structure > Reinforced concrete structures > Frame
© 2012 www.DissertationTopic.Net  Mobile