Dissertation > Excellent graduate degree dissertation topics show

Development of Online Monitoring and Diagnosis System for Dusting Blower Based on Networked Data Acquisition

Author: YuJingHui
Tutor: XieZhiJiang
School: Chongqing University
Course: Mechanical Design and Theory
Keywords: Online monitoring precise analysis networked data acquisition RS-485 bus
CLC: TF321.9
Type: Master's thesis
Year: 2008
Downloads: 102
Quote: 2
Read: Download Dissertation

Abstract


The paper introduces the intention and significance of equipment state monitoring and fault diagnosis and its application and prospect in domestic and foreign enterprise. In view of the structure form and continuous production properties of three dust blowers for No.4 blast furnace of ironmaking plant in one large steel and iron enterprise, an online monitoring and diagnosis system which can meet the practical needs is developed. The system not only can realize real-time data acquisition, analysis and processing, selection of unit, setting the configuration parameter, forming database, over-limit alarm, interlock controlling during doing the work of monitoring the operation status of dust blower, but also it has the function of precise analysis and diagnosis which could complete the following analysis work: historical data playback, time domain analysis, trend analysis, spectrum field analysis, time-delay field analysis, demodulation analysis, FFT delicate analysis and so on.The research content of this paper is determined on the basis of a thorough analysis of the practical working condition of dust-removing blower and the concrete request for system development. That is, one hand analyzing and designing the signal sampling system of condition monitoring, the other hand on comparing the merit and demerit between networked data acquisition pattern based on TCP/IP and traditional data acquisition mode based on PCI slot, the networked data acquisition pattern is adopted to achieve the data collection at last.The key contents of this paper focus on condition monitoring of dust blower system. Consider that geographical position of the three dust blowers is quit dispersive and far from the control station and operation room, the conception which based on networked data acquisition is adopted to let the sampling data be digitized locally. The error of data transmission is avoided greatly, the data validity is guaranteed, the authenticity and credibility of fault diagnosis result are enhanced because of the strong anti-interference features of digital signal. At the same time, this system provides a convenient interface for constructing the network-based monitoring and diagnosis system for various equipments in the whole enterprise.The fact shows that each function of system is verified in practice and satisfies the users from field installation and pre-operational testing to now. The paper cuts a new approach for developing condition monitoring and faults diagnosis system for machine equipment, which shows mainly in two aspects: one is data management mode, the other is method of real-time data control based on RS-485 bus, meanwhile, it lays a foundation for developing related system in the further.

Related Dissertations

  1. Based on electrical safety risks KingView Experience Systems Design and Implementation,TP273
  2. Research and Relization of X-ray Control System in Industrial CT,TP274.51
  3. Study of Monitoring System of Hydraulic Support Pressure and Roof Abscission Layer Displacement,TD325.4
  4. Research and Analysis on Device-level Network of Experimental Teaching for Microstructure,G434
  5. The Design of On-line Monitoring System of Transformer Fault,TM407
  6. The Design of Remote Concentrated Metering System on Heat Meter,TP274.2
  7. Research and Implementation of the Stress Monitoring System for Mine,TP274
  8. Research on Distributed Control System of High Temperature Vacuum Kettle,TP273.5
  9. Power Transformer Fault Diagnosis and Analysis,TM41
  10. Automatic NH3-N Analyzer Research and Design,TP216
  11. Design and Application on Remote Monitoring System of Elevator,TP277
  12. Study of Transformer On-line Monitoring Based on Vibration,TM407
  13. Oil-immersed transformers Insulation Online Monitoring System,TM411
  14. Transformer Condition Monitoring Technology and Its Application,TM407
  15. Generator partial discharge monitoring systems research and development,TM31
  16. Study of Power Transformer Condition Based Maintenance,TM41
  17. Research on the Inverse Calculation Modeling Methods of Potential Transformer under Lightning Over-voltage,TM451
  18. Study on the Application of Transformer Oil Chromatographic On-line Monitoring System in Zhaoqing Grid,TM406
  19. The Study on Power Transformer Oil on-line Monitor and Purification System,TM41
  20. The Research of Oil Chromatogram On-line Monitoring System for Power Transformer Based on CAN Bus,TM41
  21. Research of the Transformer Condition-base Maintenance Strategy in Zhaoqing Power Station,TM407

CLC: > Industrial Technology > Metallurgical Industry > Metallurgical machinery,metallurgical production automation > The ironmaking mechanical and production automation > Ironmaking mechanical > Gas dust removal machinery
© 2012 www.DissertationTopic.Net  Mobile