Dissertation > Excellent graduate degree dissertation topics show

The Study on Quality Assesses and Examination Methods of Rattan Furniture

Author: GuYanZuo
Tutor: WuZhiHui
School: Nanjing Forestry University
Course: Furniture Design and Engineering
Keywords: Rattan furniture Quality Mechanical Properties Woven surface Node
CLC: TS664.3
Type: Master's thesis
Year: 2008
Downloads: 113
Quote: 0
Read: Download Dissertation

Abstract

In this thesis with rattan furniture for the study, conducted in-depth study on the basis of the main features of the research overview of rattan furniture and rattan Rattan, rattan furniture quality assessment. The specific content including rattan furniture appearance quality, the mechanical properties of the typical components and nodes, the overall assessment of the mechanical properties of the project and test methods. The systematic exploration and research, and provides basic technical reference for the development of the rattan furniture quality assessment standards. Currently, the standards have been submittal process. At the same time, the research also helps to promote enterprise to achieve the optimal design of rattan furniture products, improve the quality and international competitiveness of our rattan furniture. The main conclusions are as follows: (1) analyze, summarize the basic content of the rattan furniture and rattan material and the Calamus Tengpi and rattan core material moisture content, the axial tensile strength and resistance to mildew performance tested research. The study indicated that: two materials moisture content or less, usually between 10 to 11%, are excellent rattan material. A similar size under conditions, first layer Tengpi the axial tensile properties superior to flat vines core; the Layer Tengpi better tensile properties than the first layer Tengpi; three vines core material, the semicircular rattan core shaft optimal to the tensile properties. Than rattan core weave rattan peel weaving anti-mildew properties of the surface layer of surface. (2) the characteristics assessed by the appearance quality rattan furniture that research on the woven surface quality of the presentation of test methods: dense, transparent woven surface layer reference gap difference and the gap difference as a measure to achieve quantitative control. Adjacent gap (the gap) the smaller the difference, the better the quality of the presentation. (3) The typical components and nodes of rattan furniture rattan furniture overall mechanical quality assessment of mechanical properties studies provide a strong reference. 1) woven surface layer is the typical components of rattan furniture in the in flexure assessment test, it reflects the good elasticity characteristics. In the size of the same or similar circumstances, Dense weave surface bending performance better than the transparent type; the Dense Tengpi woven surface bending performance is better than dense rattan core weave surface; the machine woven surface layer bending performance slightly greater than the hand-woven surface. 2) T-, L-rattan furniture typical node form. By orthogonal experiment and variance analysis showed that the the fittings, tangles, tangles material and substrate T-tensile, flexural strength of four factors are significant. Entangled material on the tensile strength to a significant degree is relatively small, the substrate affect a significant degree of bending strength is relatively small. In addition, the best the wrap angle miter form L node bending performance, the remaining two structures in the form of L-type node bending performance is relatively poor. (4) a large number of experimental verification, the assessment of the overall mechanical properties of rattan furniture can be the basic reference \

Related Dissertations

CLC: > Industrial Technology > Light industry,handicrafts > Wood processing industry,furniture manufacturing industry > A variety of products > Furniture > Rattan furniture
© 2012 www.DissertationTopic.Net Mobile