Dissertation > Excellent graduate degree dissertation topics show

Study on Electromagnetic Forces of End Windings in Large Turbo-generators

Author: DanJiCong
Tutor: YangShiYouï¼›NiGuangZheng
School: Zhejiang University
Course: Theory and New
Keywords: Large turbo-generator stator end winding meathod of image Electromagnetic field Electromagnetic forces
CLC: TM311
Type: Master's thesis
Year: 2008
Downloads: 203
Quote: 7
Read: Download Dissertation

Abstract


With ever-increasing capacity, the electromagnetic forces acting on the stator end winding are significantly increased. In the normal operating condition, the electromagnetic forces acting on the end winding may cause winding vibration and insulator friction; and in fault operating situation, these forces may result in insulator crack, winding distortion, fixation break and so on. Therefore, it is essential to study the electromagnetic forces acting on the stator end winding so as to improve the design of the machine.This dissertation focuses on the analytical study of the electromagnetic forces acting on the end windings of a 600MW large turbo-generator. To summary up, the works include:1. In Cartesian coordinates, the mathematical models for the electromagnetic fields and forces in the end regions are built on the basis of the method of image. Each top bar and lower bar is divided into twenty-nine segments. For asymptote segment which is spread on a cone surface, an approximate method is proposed to model it by using equally distanced line segments. The method of image is used to consider the effect of the main part of the machine.2. The close form formulations for the electromagnetic fields and the forces acting on the stator winding in the end region of large turbo-generator are developed based on the general electromagnetic theory. In this aspect, the Biot-Savart law and an aggregation method are employed.3. The corresponding computer software is developed and employed to numerically study the electromagnetic fields and forces acting on the winding in the end region. To facilitate the description of the numerical results, the magnetic forces are expressed in cylindrical coordinate system. Finally, the details about the electromagnetic fields and forces in the end region in steady-state and short circuited operating conditions of a 600 MW large turbogenerator are studied and some conclusions are concluded.

Related Dissertations

  1. Design and Implementation on Automatic Calibration System of Automotive PEPS Electromagnetic-field,O441.4
  2. A Research of the Underground Electromagnetic Field in Three-dimensional Inclined Geological Body,P631.325
  3. Periodic structure materials diffraction study electromagnetic field simulation algorithm,TB302
  4. Parameter Calculation and Electromagnetice Force Analysis of the Low-Voltage High-Power Multi-Branch Permanent Magnet Synchronous Motor,TM341
  5. Lightning protection model of the building or structure of different materials,TU895
  6. The Couple-field Numerical Simulation of Electro-slag Furnace Induction Hardening Based on ANSYS,TF061.2
  7. Technology for Semi-Solid of ZL101 Aluminum Alloy During Inclined Plate Cooling Under Alternating Electromagnetic Field,TG146.21
  8. Research on Analytical Method to Calculate the over Voltage and Surge Impedance of Tower under Lightning,TM863
  9. Permanent magnet biased hybrid magnetic bearing,TH133.3
  10. Field excitation IC interconnect transmission line equation and its solution,TN402
  11. Electromagnetic field simulation analysis of eddy current sensor,TP212
  12. Finite-Element Analysis of Electromagnetic Field and Temperature Field for Treatment Human Tumor with Magnetic Fluid Hyperthermia,R730.5
  13. High power microwave semiconductor devices damage threshold Experimental Technique,TN307
  14. Of large turbogenerator fault diagnosis expert system improvements and improvement,TP182
  15. Research on Conductive Linear Synchronous Motor in High Speed Maglev Train,TM341
  16. The studies of the photodetachment cross section of H-in anti parallel electric and magnetic fields,O562
  17. Study on the Methods of Scattering and Inverse Scattering of High-frequency Electromagnetic Wave in Two-dimension Medium,O451
  18. Study on Surface-magnetic Permanent Magnet Propulsion Machines,TM351
  19. The Repulsive Casimir Effect,O41
  20. Three-dimensional electromagnetic visualization technology research and,TP391.41

CLC: > Industrial Technology > Electrotechnical > Motor > Generators, large the generator group ( Zonglun,) > Turbine Generator
© 2012 www.DissertationTopic.Net  Mobile