Dissertation > Excellent graduate degree dissertation topics show

Study on Flexible Tooling System for Aircraft Large-scale Thin-wall Workpiece

Author: LuJunBai
Tutor: ZhouKai
School: Tsinghua University
Course: Mechanical Engineering
Keywords: flexible tooling system aircraft manufacturing wireless communication multi-point location adaptive optimization
CLC: V261
Type: Master's thesis
Year: 2010
Downloads: 104
Quote: 0
Read: Download Dissertation

Abstract


To solve problems in aircraft manufacturing, flexible tooling system with“Forming-Machining”process is presented, and research on key technologies in application of flexible tooling system is conducted.Wireless communication technology used in flexible tooling system is researched, and wireless communication platform based on nRF2401A and DSP56F807 is presented. Experiment is designed to check reliability of wireless communication and a resend and check method is developed to prevent data packages from missing.Pointwise degree of freedom is defined on aircraft large-scale thin-wall workpiece during its machining process where traditional six-point location principle is not suitable, and base on which adaptive multi-point location method used for this kind of workpieces is described. Further more, multi-point location/support algorithm is developed to solve positions of location/support spheres of flexible tooling system to construct envelope surface of workpiece and avoid machine tool interference.Self-generation of operation mode optimization is presented referring to self-generation principle. According to information of workpiece and machining process, topological layout and density of location/support array evolve adaptively based on finite element analysis and genetic algorithm to achieve overall optimization, which avoids problems caused by traditional adjusting methods.Bionical dynamic optimization of operation mode is presented. This method adjusts flexible tooling system operation mode according to specified cutting path in way that root system of a plant develops. Experimental results show that support distribution can be optimized to make best used of system resource. Test data of sample workpiece show that flexible tooling system meets the requirements of aircraft large-scale thin-wall workpiece machining with machining accuracy enhanced and manufacturing cycle shortened.

Related Dissertations

  1. Medical Application of a Wireless Communication Platform Based on RFID and GPRS,R319
  2. Ad Hoc Networks road traffic safety monitoring system of high - speed data transmission,TN929.5
  3. Compressed Sensing Based Abnormal Events Detection in Wireless Communication Net-works,TN929.5
  4. Preliminary Study of Simulation and Experiment of Terahertz Communication System,TN925
  5. Optical Wireless Communication Network Management System Research,TN929.1
  6. Load monitor on-site testing equipment design,TM76
  7. 800MHz ~ 2620MHz RF receiver broadband wireless communications research and design,TN851
  8. Project management in the telecommunications wireless network simulation system development application,F626
  9. Small unmanned helicopter ground monitoring system design and development,TP277
  10. Airport runway temperature monitoring system design and implementation,TP277
  11. Facilities for agricultural sensor network system design and implementation,TN929.5;TP212.9
  12. Law Regulation and Restriction Involving Intellectual Property Abuse,D923.4
  13. Hot water temperature intelligent monitoring system,TP273
  14. Design of Temperature and Humidity Intelligent Network Monitoring System Based on ARM9,TP273.5
  15. Based white LED visible light communication system research,TN312.8
  16. Multi-Element Weather Station Based on GPRS,P415.12
  17. Smart Grid Application Research of Low Voltage Power Distribution,TM727
  18. The Development of Automobile Braking Performance Test System Based on CAN Bus,U467.4
  19. Study and Development of ECG Monitoring System,R54
  20. Design of Infrared Thermometer with Wireless Data Transmission Function,TH811

CLC: > Aviation, aerospace > Aviation > Aeronautical Manufacturing Technology > Manufacturing process and equipment
© 2012 www.DissertationTopic.Net  Mobile