Dissertation > Excellent graduate degree dissertation topics show

Design of the Monitor System for Cable Trench Based on ARM and CANBus

Author: ChenDong
Tutor: SunWanRong;HuFangMing
School: Xi'an University of Electronic Science and Technology
Course: Circuits and Systems
Keywords: ARM μC/OS- Ⅱ CAN bus The electricity cable channel monitoring
CLC: TM76
Type: Master's thesis
Year: 2009
Downloads: 130
Quote: 2
Read: Download Dissertation

Abstract


Designed based on ARM7 the electricity cable channel monitoring system , the monitoring system to the cable channel safety monitoring role played theft, fire , moisture . This topic embedded hardware is based on the the ARM7 architecture of the LPC2292 chip ; market a wide range of real - time operating system at the same time , the subject chosen kernel is small, easy to cut, portability good source code open real-time operating system μC / OS - Ⅱ and CAN bus for data transfer . CAN bus is a fieldbus that can effectively support distributed control or real-time control , high performance and high reliability features , has been formed with international standards . This topic briefly describes the characteristics of the power cable - channel monitoring system and research background , about when the cable channel monitoring system is designed to take the overall design philosophy and framework structure . After the features and functions of the ARM7 processor and CAN bus , and then discusses in detail the hardware circuit design of the whole system . Describe the introduction of real-time operating system μC/OS- Ⅱ made ??ported to μC / OS-II LPC2292 hardware platform specific implementation process . Finally, the software design of the cable -channel data acquisition and control system based on CAN bus and ARM7 microcontrollers achieve . Actual tests show that the system is capable of stable operation , and the ability to achieve real-time monitoring of the cable channel , data acquisition as well as security alarms and other functions to meet the requirements of the online monitoring system of power cables .

Related Dissertations

  1. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  2. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  3. Study on the Locomotive Dynamic Supervision System,U284.48
  4. The Inductive Load Based Vehicle Body Network Control System,U463.6
  5. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  6. The Electric Power Steering System,U463.4
  7. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  8. Development of Experimental Robot Control System Based on ARM,TP242.6
  9. Data Collecting and Processing of Multi-Linear-CCD Visual Measuring System,TP274.2
  10. Research on Visual Servo System of Mechanical ARM,TP242.6
  11. Research on Software of TFT-LCD Testing Equipment Based on ARM,TN873.93
  12. Signal Acquisition and Processing Platform Design and Implementation of Trawl Sonar System,S951.2
  13. Development of Intelligent Interpretation System Based on ARM9,TP391.44
  14. Based on Embedded Web Server Monitoring System,TP393.05
  15. Cortex-M3 -based real-time data acquisition system μC/OS- Ⅱ and CAN bus,TP274.2
  16. Storage System Design in Solid State Disk Based PCI Express Interface,TP333
  17. Design of AHB Monitor Based on SHA and AES Algorithms,TP309.7
  18. The Research of Car Virtual Instrument System with Linux and ARM,U463.7
  19. Design of the Clutch Control System for Electric Automobile,U463.211
  20. The Application of ARM on SVG,TM761
  21. The Research of Emotional Design of Wuhan Urban Bus Stations,TU248.3

CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Power system automation
© 2012 www.DissertationTopic.Net  Mobile